Model NO.
PPM-T293A
Thread Type
1502 hammer union
Wiring Type
Three-Wire
Measuring Medium
Wet Soil,Oil,Corrosive Liquidand Gas
IP Rating
IP67
Certification
CMC
Customized
Customized
Transport Package
Standard Package for Exporting
Trademark
CSPPM
Origin
Changsha, China
Production Capacity
10000 PCS/Year
Type:
Piezoresistive Pressure Sensor
Component:
Mechanical Structure Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Digital Type
Production Process:
Integration
Material:
Stainless Steel
Fracturing Trucks High Performance Pressure Transducer Ppm-T293A
Description
The Model PPM-T293 pressure transmitters have been designed specifacally for oil field application. These pressure transmitters provide different kinds of signal output, including 4-20mA, 1-5VDC, 0-10VDC etc. The model PPM-T293 has wide measuring ranges from 0…5000PSI to 0…45000 PSI, and it features fast dynamic response speed, high accuracy, strong anti-fatigue. The hammer union pressure fitting makes it easy to install and convenience to use at oil well driling and servicing.
2.Shock and vibration resistant
3.Pressure up to 45,000 PSI
4.Hammer Union pressure fitting
Oil well drilling and servicing, Acidizing, Choke Manifolds, Extraction, Fracturing and Cementing,Mud Pumps, New Well development, Nitrogen Injection, Service and Cement Trucks, Standpipe, Stimulation and Well head measurement.
Dimensions in m
Order information
Description
The Model PPM-T293 pressure transmitters have been designed specifacally for oil field application. These pressure transmitters provide different kinds of signal output, including 4-20mA, 1-5VDC, 0-10VDC etc. The model PPM-T293 has wide measuring ranges from 0…5000PSI to 0…45000 PSI, and it features fast dynamic response speed, high accuracy, strong anti-fatigue. The hammer union pressure fitting makes it easy to install and convenience to use at oil well driling and servicing.
Features
1.High accuracy: 0.25%FS or 0.5%FS2.Shock and vibration resistant
3.Pressure up to 45,000 PSI
4.Hammer Union pressure fitting
Applications
Oil well drilling and servicing, Acidizing, Choke Manifolds, Extraction, Fracturing and Cementing,Mud Pumps, New Well development, Nitrogen Injection, Service and Cement Trucks, Standpipe, Stimulation and Well head measurement.Specification
| Tested Media | Wet Soil,Oil,Corrosive liquidand gas |
| Pressure type | Gauge pressure(G), Sealed pressure(S), Vent Pressure(V) |
| Full Scale Pressure Range | 0~105MPa,150MPa,200MPa ,300MPa |
| Supply Voltage | 10-32VDC |
| Output Signal | 4-20mA,0-5VDC,1-5VDC,0-10VDC,3mV/V |
| Non-Linearity | 0.04%FS |
| Repeatability | 0.04%FS |
| Combined Accuracy | 0.1%FS,0.2%FS,0.5%FS Alternative |
| Long-Term Stability | 0.1%FS/Year (representative value) |
| Operating Temperature | -43~85ºC/125ºC |
| Compensated Temperature | -25~70ºC/100ºC |
| Response Time | ≤1mSec(representative value) |
| Insulation Resistance | ≥500 MΩ/100V |
| Safety overload pressure | 200%FS(2 Times Full Range, special: 5 Times Full Range) |
| Rupture pressure | 500%FS(5 Times Full Range, special: 10 Times Full Range) |
| Shock Limitation | About 10g/0~2000HZ |
| Impact Resistance | About 50g/1ms |
| Connection | Chuck type seal or specified |
| Wetted Materials | 17-4PH stainless steel |
| Relatvie Humidity | 0~100% RH |
| Degree of Protection | IP67 |
| Electrical Connection | Aviation connector |
Dimensions in m
Order information
| Model PPM-T293A Pressure Transmitter | ||||||||||
| Code | Pressure type | |||||||||
| G | Gauge pressure | |||||||||
| S | Sealed pressure | |||||||||
| D | Differential pessure | |||||||||
| A | Absolute pressure | |||||||||
| Code | Pressure ranges | |||||||||
| M | 0~ X MPa | |||||||||
| K | 0~ X KPa | |||||||||
| P | 0~ X Pa | |||||||||
| Code | Accuracy | |||||||||
| 1 | ±0.5%FS | |||||||||
| 2 | ±0.25%FS | |||||||||
| 3 | ±0.1%FS | |||||||||
| 4 | 0.075% | |||||||||
| Code | Output signal | |||||||||
| V0 | mV | |||||||||
| A1 | 4~20mA | |||||||||
| V1 | 0~5V DC | |||||||||
| V2 | 1~5V DC | |||||||||
| V3 | 0.5~4.5V DC | |||||||||
| V4 | 0~10V DC | |||||||||
| A0 | Others | |||||||||
| Code | Operation temperature | |||||||||
| T1 | -10~70ºC | |||||||||
| T2 | -25~85ºC | |||||||||
| T3 | -30~125ºC | |||||||||
| T4 | -45~150ºC | |||||||||
| T5 | -10~175ºC | |||||||||
| T0 | Others | |||||||||
| Code | Power supply | |||||||||
| D1 | 5VDC | |||||||||
| D2 | 10VDC | |||||||||
| D3 | 24VDC(9-32)VDC | |||||||||
| D0 | Other | |||||||||
| Code | Process connection | |||||||||
| M1 | M20x1.5 | |||||||||
| M2 | M14 x1.5 | |||||||||
| M3 | M10x1 | |||||||||
| G1 | G1/4 | |||||||||
| G2 | G1/2 | |||||||||
| N1 | 1/4NPT | |||||||||
| N2 | 1/2NPT | |||||||||
| F0 | Other | |||||||||
| Code | Electrical connectiong | |||||||||
| W1 | Cable outlet | |||||||||
| W2 | DIN43650 | |||||||||
| W3 | Circular connector M12 x 1 | |||||||||
| Code | Other | |||||||||
| P1 | Commom | |||||||||
| P2 | Non-cavity diaphragm | |||||||||
Send Message
