Model NO.
HDM1300
Thread Type
G
Measuring Medium
Liquid Gas Steam
IP Rating
IP66
Certification
ISO9001
Customized
Customized
Sensor Type
Pressure Sensor
Display
LCD
Temp Accuracy
0.5%FS
Long-term Stability
0.2%FS/year
Supply
24VDC
Output
4~20mADC or Three wire Voltage
Storage Temperature
-40~90ºC
Working Temp
-30~70ºC
Protection of Shell
IP65
Transport Package
Carton
Trademark
HangJia Sensor
Origin
China
HS Code
90262010
Production Capacity
50000 Pieces / Year
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Injection
Material:
Metal
Product Overview:
HDM1300 Simple single loop digital display control instrument, fool operation, a 0.3 magnitude measurement precision, seven new appearance size, double four LED display, can support the thermocouple, heat resistance, voltage (root operation), current (root operation) and input in the transmitter, suitable temperature, pressure, flow, liquid level, humidity, such as industrial process monitoring.It supports 2-way alarm function, 1-way transformer output or RS485 communication interface using standard MODBUS protocol, 1-way DC24V feed output, photoelectric isolation of input end, output end and power end, 100-240V AC/DC or 12-36V DC switching power supply, standard snap-in installation, working environment temperature is 0-50ºC, and relative humidity is 5-85%RH without condensation.
Features:
1. Display panel appearance structure drawing
(1) PV display window (measured value)
(2) SV display window
Display input type and other parameters in measurement state
Displays the set value in the parameter setting state
(3) First alarm (AL1) and second alarm (AL2) indicator light, RUN light and output light (OUT)
(4) Confirm key
(5) Shift key
(6) Reduced bond
(7) Increase the key
The meter core can be pulled out of the case, the method is to remove the lock on both sides of the front panel of the meter to the outside, and then grab the front panel of the meter to pull out, the table core and the case can be separated.In the back, the watch core inserted into the case must be pushed tight, and lock lock lock, in order to ensure protection standards.
Outline dimensions and hole dimensions of the instrument:
Structure Drawing:
The dimensions are A, B, C, D and E wiring diagrams
Note: The direction of the terminals on the back cover of horizontal and vertical instruments is different. As shown in figure 1.
H Wiring Diagram
Note: If different functions are marked on the same set of terminals in the wiring diagram above, only one of the functions can be selected.For example, RS485 communication function and transformer output function are on the same set of OUT terminals, only one of them can be selected.
Ordering Guide:
Related Products:
Certification:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
HDM1300 Simple single loop digital display control instrument, fool operation, a 0.3 magnitude measurement precision, seven new appearance size, double four LED display, can support the thermocouple, heat resistance, voltage (root operation), current (root operation) and input in the transmitter, suitable temperature, pressure, flow, liquid level, humidity, such as industrial process monitoring.It supports 2-way alarm function, 1-way transformer output or RS485 communication interface using standard MODBUS protocol, 1-way DC24V feed output, photoelectric isolation of input end, output end and power end, 100-240V AC/DC or 12-36V DC switching power supply, standard snap-in installation, working environment temperature is 0-50ºC, and relative humidity is 5-85%RH without condensation.
Features:
1. Display panel appearance structure drawing
(1) PV display window (measured value)
(2) SV display window
Display input type and other parameters in measurement state
Displays the set value in the parameter setting state
(3) First alarm (AL1) and second alarm (AL2) indicator light, RUN light and output light (OUT)
(4) Confirm key
(5) Shift key
(6) Reduced bond
(7) Increase the key
The meter core can be pulled out of the case, the method is to remove the lock on both sides of the front panel of the meter to the outside, and then grab the front panel of the meter to pull out, the table core and the case can be separated.In the back, the watch core inserted into the case must be pushed tight, and lock lock lock, in order to ensure protection standards.
Outline dimensions and hole dimensions of the instrument:
| Outline Dimension | Hole Dimension | Outline Dimension | Hole Dimension |
| 160*80mm (Horizontal type) | 152*76mm | 48*96mm (Vertical Type) | 45*92mm |
| 80*160mm (Vertical Type) | 76*152mm | 72*72mm (Quadrate Type) | 68*68mm |
| 96*96mm (Quadrate Type) | 92*92mm | 48*48mm (Quadrate Type) | 45*45mm |
| 96*48mm (Horizontal type) | 92*45mm |
Structure Drawing:
The dimensions are A, B, C, D and E wiring diagrams
Note: The direction of the terminals on the back cover of horizontal and vertical instruments is different. As shown in figure 1.
F Wiring Diagram
H Wiring Diagram
Note: If different functions are marked on the same set of terminals in the wiring diagram above, only one of the functions can be selected.For example, RS485 communication function and transformer output function are on the same set of OUT terminals, only one of them can be selected.
Ordering Guide:
| 1. Specification | 2. Graduation Input | ||
| Code | Width*Height*Depth | Code | Graduation (Measuring Range) |
| A | 160*80*110mm (Horizontal type) | 0 | Thermocouple B(400~1800ºC) |
| B | 80*160*110mm (Vertical Type) | 1 | Thermocouple S(0~1600ºC) |
| C | 96*96*110mm (Quadrate Type) | 2 | Thermocouple K(0~1300ºC) |
| D | 96*48*110mm (Horizontal type) | 3 | Thermocouple E(0~1000ºC) |
| E | 48*96*110mm (Vertical Type) | 4 | Thermocouple T(-200.0~400.0ºC) |
| F | 72*72*110mm (Quadrate Type) | 5 | Thermocouple J(0~1200ºC) |
| H | 48*48*110mm (Quadrate Type) | 6 | Thermocouple R(0~1600ºC) |
| 3. OUTPUT | 7 | Thermocouple N(0~1300ºC) | |
| Code | Output Type ( load resistance RL) | 8 | F2(700~2000ºC) |
| X | No output | 9 | Thermocouple Wre3-25(0~2300ºC) |
| 0 | 4-20mA(RL≤500Ω) | 10 | Thermocouple Wre5-26(0~2300ºC) |
| 1 | 1-5V(RL≥250KΩ) | 11 | Thermal Resistance CU50(-50.0~150.0ºC) |
| 2 | 0-10mA(RL≤1KΩ) | 12 | Thermal Resistance CU53(-50.0~150.0ºC) |
| 3 | 0-5V(RL≥250KΩ) | 13 | Thermal Resistance CU100(-50.0~150.0ºC) |
| 4 | 0-20mA(RL≤500Ω) | 14 | Thermal Resistance PT100(-200.0~650.0ºC) |
| 5 | 0-10V(RL≥4KΩ) | 15 | Thermal Resistance BA1(-200.0.0~600.0ºC) |
| D1 | RS485 communication interface (Modbus RTU) | 16 | Thermal Resistance BA2(-200.0~600.0ºC) |
| 4. Alarm (Relay contact output)(See Note) | 17 | Linear Resistance 0~1KΩ(-1999~9999) | |
| Code | Alarm Ways | 18 | Remote Resistance 0-350Ω (-1999~9999) |
| X | No Output | 19 | Remote Resistance 30-350Ω (-1999~9999) |
| 1 | 1 way Alarm | 20 | 0~20mV (-1999~9999) |
| 2 | 2 way Alarm | 21 | 0~40mV (-1999~9999) |
| 5. Power Output | 22 | 0~100mV (-1999~9999) | |
| Code | Power Output (Output Voltage) | 23 | Internal retention |
| X | No output | 24 | Internal retention |
| P | Power Output(Load Current≤30mA) | 25 | 0~20mA (-1999~9999) |
| Such as "P(24)"says Power Output24V. | 26 | 0~10mA (-1999~9999) | |
| 6.Power Supply | 27 | 4~20mA (-1999~9999) | |
| Code | Voltage Range | 28 | 0~5V (-1999~9999) |
| A | AC/DC 100-240V (AC/50-60Hz) | 29 | 1~5V (-1999~9999) |
| D | DC 12-36V | 30 | Internal retention |
| 7. Remark | 31 | 0~10V (-1999~9999) | |
| No remarks can be omitted | 32 | 0~10mA Square Root (-1999~9999) | |
| 33 | 4~20mA Square Root (-1999~9999) | ||
| 34 | 0~5V Square Root (-1999~9999) | ||
| 35 | 1~5V Square Root (-1999~9999) | ||
| 55 | All Switch | ||
Related Products:
Certification:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.5. Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.6. Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.7. Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU.
A: We could accept T/T, Paypal, WU.
Send Message
