The Model XYT-193 Digital Pressure Transducer is an oil filled OEM pressure sensitive element isolated with a 316 stainless steel corrugated
diaphragm.
The chip adopts the international advanced high-stable and high-precision silicon pressure chip, and applies the new production technology and high-precision production inspection equipment, so that the product has excellent stability, temperature compensation and nonlinearity are carried
out through the special integrated circuit developed by the company. Correction, direct output of standard (4~20) mADC signal. Low powerconsumption, easy to connect to various devices, easy to assemble and strong applicability. This product can be widely used in the detection of various fluid pressures.
Environmental Condition
Vibration: no change under 10gRMS, 20Hz ~2000Hz
Shock: 100g, 11ms
Media Compatibility: Liquids or gases compatible with materials of construction and fluororubber
Basic Condition
Ambient temperature: (25± 1)C
Vibration: 0.1g(1m/s2)Max
Humidity: (50%±10%)RH
Ambient pressure: (86-106) kPa
Construction Performance
Diaphragm material: 316L
Shell material: 316L
Pressure tube material: 316L
Sealing ring: Butyl cyanide
Net weight: about 26g
With gauge pressure, absolute pressure, sealed pressure form
Isolated structure, suitable for a variety of fluid media
Standard Φ19mm sensor general size
All stainless steel 316L material
Standard (4~20) mA output, high precision
Power supply: 8-30VDC
-20~80C wide temperature range compensation
Technical Parameters
| Item | Min | Typ. | Max | Units | Notes |
| Power | 8 | 24 | 30 | Vdc | |
Output Comprehensive Accuracy | ±0.1 | ±0.2 | %FS | @25C | |
| ±0.3 | ±0.5 | %FS | -20~80C | ||
| Repeatability | ≤0.1 | %FS | |||
| Hysteresis | ≤0.1 | %FS | |||
| Overload pressure | 150 | %FS | |||
| ESD protection | 2000 | V | |||
| Storage temperature | -40~125 | C | |||
| Operating temperature | -40~100 | C | |||
| Compensated temperature range | -20~80 | C | |||
| long term stability | ±0 2 | %FS/year | |||
| Temperature drift coefficient | 0.01 | 0.04 | 0.08 | PPM/C | |
| Power up time | 80 | ms |
FAQ
1. How long will you reply me?
Normally in 1 hours, no more than 12 hours.
2. How can I get the quotation?
Please provide specification and application including sensing element, pressure range, thread connection, pressure type, medium, electronic connection, shell material etc. More details, more accurate quotation and earlier response.
3. Can I get sample?
Contact with our staff online directly and they would check stock for you.
4. Can I visit your factory?
You are warmly welcomed, our factory is located at Baoji city, Shaanxi province, China.
5. Can we use our logo on the products?
Yes, we provide OEM/ODM service.
Send Message
