Model NO.
PPM-S315A
Thread Type
M
Wiring Type
Four-Wire
Measuring Medium
Liquid
IP Rating
IP65
Certification
CMC
Customized
Customized
Transport Package
Standard Package for Exporting
Specification
Stainless steel
Trademark
CSPPM
Origin
Changsha, China
Production Capacity
10000 PCS/Year
Type:
Resistance Strain Gauge Pressure Sensors
Component:
Mechanical Structure Type
For:
Strain Gauge Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Injection
Material:
Stainless Steel
PPM-S315A Pressure Sensor for high temperature application
Description
The model PPM-S315A pressure sensor adopts thin-film sputtering technology. Each sensor was strictly temperature compensated for both zero and span. The PPM-S315A is available with measuring ranges up to 120Mpa and is suitable for oil industrial application. All wetted parts are manufactured from stainless steel and are fully welded. It is easy to install and configure and customized dimensions are accepted.Features
1. Small in size2. High accuracy up to 0.1%FS
3. High stability
4. Resistant to high and low temperature
5. strong anti-overload ability
Applications
1. Oil fields2. Aerospace industry
3. Engine testing
4. Internal combustion engine, diesel engine
5. Applications in harsh areas
Specification
| Measuring medium | Gas, liquid, steam |
| Pressure type | Gauge pressure(G), Sealed pressure(S), Absolute pressure(A) |
| Pressure range | 0~1MPa…10MPa…30MPa…40MPa…60MPa…70MPa…100MPa…120MPa |
| Power supply | 5VDC(3-12VDC) |
| Output signal | 0-10mV, 0-25mV(2mV/V, 5mV/V) |
| Nonlinearity | ≤0.02% FS, ≤0.04% FS, ≤0.05% FS |
| Hysteresis | ≤0.02% FS, ≤0.04% FS, ≤0.05% FS |
| Non-repeatability | ≤0.1% FS |
| Accuracy | 0.1%FS, 0.2%FS |
| Long-term stability | 0.1%FS/year |
| Medium temp | -40~125ºC/150ºC/175ºC/200ºC/250ºC |
| Operation temp | -40~+85ºC |
| Zero temp. drift | ≤0.005%FS/ºC, ≤0.01%FS/ºC |
| FS temp. drift | ≤0.008%FS/ºC, ≤0.015%FS/ºC |
| Response time | ≤1ms(10%~90%) |
| output impedance | 1500±50Ω,3300±50Ω,5500±1500Ω |
| Insulation resistance | ≥500 MΩ/100V |
| Overpressure | 200%FS (2 times FS) |
| Damage pressure | 500%FS (5 times FS) |
| Vibration resistance | 5~1000Hz |
| Shcok resistance | 50g, 20ms |
| Process connections | M10×1, or other process connections on request |
| Sealing method | Double sealing rings, sealing cone, end face sealing |
| Materials | Wetted parts: 17-4PH, 15-5PH Non-wettedparts: stainless steel 316, 1Cr18Ni9Ti |
| Ingress protection | IP65 |
| Electrical connections | Red-Power+, Black-Power-, Green-Output+, White-Output- |
Dimensions in mm
Order information
| Model PPM-S315A Pressure Transmitter | ||||||||||
| Code | Pressure type | |||||||||
| G | Gauge pressure | |||||||||
| S | Sealed pressure | |||||||||
| A | Absolute pressure | |||||||||
| Code | Pressure ranges | |||||||||
| M | 0~ X MPa | |||||||||
| K | 0~ X KPa | |||||||||
| P | 0~ X Pa | |||||||||
| Code | Accuracy | |||||||||
| 1 | ±0.5%FS | |||||||||
| 2 | ±0.25%FS | |||||||||
| 3 | ±0.1%FS | |||||||||
| Code | Output signal | |||||||||
| V0 | mV | |||||||||
| Code | Operation temperature | |||||||||
| T1 | -10~70ºC | |||||||||
| T2 | -25~85ºC | |||||||||
| T3 | -30~125ºC | |||||||||
| T4 | -45~150ºC | |||||||||
| T5 | -10~175ºC | |||||||||
| T0 | Others | |||||||||
| Code | Power supply | |||||||||
| D1 | 5VDC | |||||||||
| D2 | 10VDC | |||||||||
| D0 | Other | |||||||||
| Code | Electrical connectiong | |||||||||
| W1 | Cable outlet | |||||||||
| Code | Other | |||||||||
| P1 | Commom | |||||||||
| P2 | Non-cavity diaphragm | |||||||||
Send Message
