Model NO.
MO300
Type
Auto Clutch Bearing
Material
Chrome Steel
Tolerance
P0
Certification
ISO9001
Clearance
C3
Car Make
Honda
Max.Torque(N.M)
373n.M
Keyway
5*5mm
H-M No.of Tapped Holes*Size*Pitch
6*M8*P1.25
Weight
1.8kg
Max Speed
2900n.M
Trademark
R&B
Specification
SGS
Origin
Jiangsu, China
HS Code
84836000
1. MG Series Cam Clutch is used for inner race overrunning applications. MI Series Cam Clutch is used for indexing applications.
2. For attaching a pulley, a gear, or sprocket to the clutch, insert the clutch into the hub of the device, and screw the bolts (high tension) into the tapped holes on the clutch end. The tolerance bore of the hub
Should be H6 or H7 of JIS standard
3. Recommended shaft tolerances are as follows:
4. The key should be in accordance with JIS B1301-1959. However, for M750 and above models, a key is
Attached.
5. Use only a parallel key to secure the clutch. Never use a tapered key.
6. If the clutch receives shock loads or is designed for use at full torque capacity, it is better to use a
Hardened key and shaft.
7. Allow for a clearance between the top of the clutch keyway and the top of the key for pressure ventilation of the clutch in the case of MG Series. A pressure ventilation hole is provided on the keyway of the clutch inner race.
8. When mounting the clutch on a shaft, apply pressure to the inner race, but never to the outer race.
9. Thrust load should be taken up by other devices, not by the Cam Clutch.
10. When using MG Series at medium and high speeds, pay attention to heating. Longevity is shortened if
The temperature of Cam Clutch outer race rises to over 70° C. In case of continuous over running
Please contact Tubaki. In this case, use a different model or provide an oil bath or forced lubrication.
11. Oil is not sealed in at the time of shipment. Supply an appropriate amount of oil before use.
12. When placing an order for MG Series Cam Clutch model MG 750 and above, please inform of the overrunning speed you use.
13. For vertical mounting, please consult.
Model | Torque Capacity (N@m) | Drag Torque (N@m) | Max. Overrunning (r/min) Inner Race | Bore Size | A | B | C | PCD | E | F | G | H | H-M No.of Tapped Holes ×Size×Pitch | S | Weight (kg) | ||
| Dia. (H7) | Keyway | (h7) | D | ||||||||||||||
| MG 300R | 314 | 0.16 | 2800 | 19 | 5x2 | 115 | 77 | 63 | 66 | 60 | 53.5 | 1.5 | 28.5 | 4xM6xP1.0 | 13 | 2.0 | |
| MG 400R | 539 | 0.20 | 2600 | 22 | 5x2 | 122 | 88 | 70 | 73 | 67 | 53.5 | 1.5 | 31.7 | 4xM8xP1.25 | 16 | 3.0 | |
| MG 500R | 1620 | 0.36 | 2400 | 31.5 | 7x3 | 154 | 108 | 89 | 92 | 86 | 66.5 | 1.5 | 44.4 | 4xM8xP1.25 | 16 | 5.5 | |
| MG 600R | 3140 | 0.59 | 2100 | 50 | 12x3.5 | 165 | 136 | 95 | 120 | 92 | 71.5 | 1.5 | 69.8 | 6xM8xP1.25 | 16 | 9.5 | |
| MG 700R | 5880 | 1.19 | 1500 | 70 | 18x6 | 207 | 180 | 127 | 160 | 124 | 81.5 | 1.5 | 101.5 | 6xM10xP1.5 | 20 | 21.0 | |
| MG 750R | 9500 | 2.75 | 1800 | 85 | 24x6 | 280 | 200 | 153 | 175 | 150 | 128.5 | 1.5 | 110 | 8xM14xP2.0 | 25 | 40.3 | |
| MG 800R | 17600 | 4.32 | 1300 | 110 | 28x7 | 298.5 | 250 | 158 | 220 | 155 | 142 | 1.5 | 140 | 8xM16xP2.0 | 25 | 50.6 | |
| MG 900R | 24500 | 5.39 | 1200 | 135 | 35x9 | 314.5 | 300 | 165 | 265 | 160 | 152 | 2.5 | 170 | 10xM16xP2.0 | 32 | 77.6 | |
| MG 1000R | 33800 | 6.47 | 1200 | 160 | 38x10 | 341 | 370 | 188 | 325 | 180 | 157 | 4.0 | 200 | 12xM16xP2.0 | 32 | 116.6 | |
| MG 1100R | 78400 | 12.74 | 350 | 185 | 45x14 | 400 | 470 | 260 | 415 | 250 | 140 | 5.0 | 260 | 12xM20xP2.5 | 40 | 275.0 | |
| MG 1200R | 95100 | 15.29 | 300 | 200 | 45x14 | 439 | 500 | 318 | 440 | 300 | 130 | 9.0 | 280 | 12xM24xP3.0 | 45 | 320.0 | |
| MG 1300R | 176000 | 15.98 | 250 | 250 | 56x17.5 | 470 | 600 | 340 | 530 | 320 | 140 | 10.0 | 340 | 12xM30xP3.5 | 50 | 480.0 | |
When it comes to mechanical One-Way Clutches, our Cam Clutch is the best
This mechanical, unidirectional clutch has a number of cams arranged regularly, providing backlash-free operations.
High precision through advanced machining using dedicated machines
Excellent durability with uniquely heat treated cams
Secure operation and highly reliable performance
Applications of one way clutch bearing:
Air cleaning plants; Gear Reducers , Conventional and Nuclear Power Plants,Agricultural machines; Automotive Industry, Clay Pigeon Traps , High Voltage Switchgear, Buchet elevators; Compressors; Conveyors; Cranes and hoists; Dry cleaning machinery; Duplicator equipment; Fish net machines; Heat-treatment furnaces; Induced draft fans; Multi-states conveyors; Packaging machinery; Printing machinery; Pumps; Punch presses and feeders; Power plants; Refinery equipment; Speed reducers; Standby power units; Textile looms; Two-speed grinders; Two-speed shiftovers; Washing machines; Wire winding machinery. Rolling Mills, Roller Coaster, Fitness Machines, Industrial Fans, Vertical Pumps
Use in Various Applications
OverrunningIn this type of application, the different conditions of engagement and disengagement are repeated arbitrarily, when the Cam Clutch inner and outer races engage each other to transmit torque, and when the Cam Clutch continues overrunning through the difference in rotating speed and direction between the inner and outer races. This is the same behavior as a freewheel on the rear bicycle wheel.
IndexingThis is also referred to as a rotary intermittent feed. Transmits torque to the inner race (shaft) by converting the outer race motion for a certain cycle into intermittent rotary movement. High-frequency engagement and freewheeling are repeated in this application.
BackstoppingIn backstop applications, the Cam Clutch is used to prevent reverse rotation. The Cam Clutch continues freewheeling when the machinery is in operation, and it engages if reverse rotation occurs unexpectedly.
NSK-WARNERGX series one way clutch :NSK-WARNER GX15/NSK-WARNER GX17/NSK-WARNER GX20/NSK-WARNER GX22/NSK-WARNER GX25/NSK-WARNER GX30/NSK-WARNER GX35/NSK-WARNER GX40/NSK-WARNER GX45/NSK-WARNER GS50/NSK-WARNER GX55/NSK-WARNER GX60/NSK-WARNER GX65/NSK-WARNER GX70
NSK-WARNERGXG series one way clutch:NSK-WARNER GX15G/NSK-WARNER GX17G/NSK-WARNER GX20G/NSK-WARNER GX22G/NSK-WARNER GX25G/NSK-WARNER GX30G/NSK-WARNER GX35G/NSK-WARNER GX40G/NSK-WARNER GX45G/NSK-WARNER GS50G/NSK-WARNER GX55G/NSK-WARNER GX60G/NSK-WARNER GX65G/NSK-WARNER GX70G
NSK-WARNERSHC series one way clutch:NSK-WARNER SHC10T/NSK-WARNER SHC16T/NSK-WARNER SHC20T/NSK-WARNER SHC25T/NSK-WARNER SHC32T/NSK-WARNER SHC40T/NSK-WARNER SHC45T
NSK-WARNERPNC series one way clutch:NSK-WARNER PNC15/NSK-WARNER PNC17/NSK-WARNER PNC20/NSK-WARNER PNC22/NSK-WARNER PNC25/NSK-WARNER PNC30/NSK-WARNER PNC35/NSK-WARNER PNC40/NSK-WARNER PNC45/NSK-WARNER PNC50/NSK-WARNER PNC55/NSK-WARNER PNC60/NSK-WARNER PNC65/NSK-WARNER PNC70/NSK-WARNER PNC75/NSK-WARNER PNC80/NSK-WARNER PNC85/NSK-WARNER PNC90/NSK-WARNER PNC95/NSK-WARNER PNC100/NSK-WARNER PNC105/NSK-WARNER PNC110/NSK-WARNER PNC120/NSK-WARNER PNC130/NSK-WARNER PNC135/NSK-WARNER PNC140/NSK-WARNER PNC150/NSK-WARNER PNC160/NSK-WARNER PNC170/NSK-WARNER PNC180/NSK-WARNER PNC190/NSK-WARNER PNC200
NSK-WARNERPHC series one way clutch:NSK-WARNER PHC15/NSK-WARNER PHC17/NSK-WARNER PHC20/NSK-WARNER PHC22/NSK-WARNER PHC25/NSK-WARNER PHC30/NSK-WARNER PHC35/NSK-WARNER PHC40/NSK-WARNER PHC45/NSK-WARNER PHC50/NSK-WARNER PHC55/NSK-WARNER PHC60/NSK-WARNER PHC65/NSK-WARNER PHC70/NSK-WARNER PHC75/NSK-WARNER PHC80/NSK-WARNER PHC85/NSK-WARNER PHC90/NSK-WARNER PHC95/NSK-WARNER PHC100/NSK-WARNER PHC105/NSK-WARNER PHC110/NSK-WARNER PHC120/NSK-WARNER PHC130/NSK-WARNER PHC135/NSK-WARNER PHC140/NSK-WARNER PHC150/NSK-WARNER PHC160/NSK-WARNER PHC170/NSK-WARNER PHC180/NSK-WARNER PHC190/NSK-WARNER PHC200
NSK-WARNERPHCX series one way clutch:NSK-WARNER PHC15X/NSK-WARNER PHC17X/NSK-WARNER PHC20X/NSK-WARNER PHC22X/NSK-WARNER PHC25X/NSK-WARNER PHC30X/NSK-WARNER PHC35X/NSK-WARNER PHC40X/NSK-WARNER PHC45X/NSK-WARNER PHC50X/NSK-WARNER PHC55X/NSK-WARNER PHC60X/NSK-WARNER PHC65X/NSK-WARNER PHC70X/NSK-WARNER PHC75X/NSK-WARNER PHC80X/NSK-WARNER PHC85X/NSK-WARNER PHC90X/NSK-WARNER PHC95X/NSK-WARNER PHC100X/NSK-WARNER PHC105X/NSK-WARNER PHC110X/NSK-WARNER PHC120X/NSK-WARNER PHC130X/NSK-WARNER PHC135X/NSK-WARNER PHC140X/NSK-WARNER PHC150X/NSK-WARNER PHC160X
NSKPHCT series one way clutch:NSK-WARNER PHC19T/NSK-WARNER PHC22T/NSK-WARNER PHC32T/NSK-WARNER PHC50T/NSK-WARNER PHC70T/NSK-WARNER PHC85T/NSK-WARNER PHC110T/NSK-WARNER PHC135T/NSK-WARNER PHC160T/NSK-WARNER PHC185T/NSK-WARNER PHC200T/NSK-WARNER PHC250T
NSKPHCXT series one way clutch :NSK-WARNER PHC19XT/NSK-WARNER PHC22XT/NSK-WARNER PHC32XT/NSK-WARNER PHC50XT/NSK-WARNER PHC70XT/NSK-WARNER PHC85XT/NSK-WARNER PHC110XT/NSK-WARNER PHC135XT/NSK-WARNER PHC160XT/NSK-WARNER PHC185XT/NSK-WARNER PHC200XT/NSK-WARNER PHC250XT
NSK-WARNERCNC series one way clutch:NSK-WARNER CNC30*20/NSK-WARNER CNC30*30/NSK-WARNER CNC50*45/NSK-WARNER CNC50*50/NSK-WARNER CNC65*50/NSK-WARNER CNC65*55/NSK-WARNER CNC65*60/NSK-WARNER CNC65*65/NSK-WARNER CNC75*70/NSK-WARNER CNC75*75/NSK-WARNER CNC85*80/NSK-WARNER CNC85*85/NSK-WARNER CNC95*90/NSK-WARNER CNC95*95/NSK-WARNER CNC110*100/NSK-WARNER CNC110*105/NSK-WARNER CNC110*110/NSK-WARNER CNC135*120/NSK-WARNER CNC135*130/NSK-WARNER CNC135*135/NSK-WARNER CNC160*140/NSK-WARNER CNC160*150/NSK-WARNER CNC160*160/NSK-WARNER CNC200*170/NSK-WARNER CNC200*180/NSK-WARNER CNC200*190/NSK-WARNER CNC200*200/NSK-WARNER CNC220-210/NSK-WARNER CNC220-220/NSK-WARNER CNC250-230/NSK-WARNER CNC250-240/NSK-WARNER CNC250-250/NSK-WARNER CNC300-260/NSK-WARNER CNC300-270/NSK-WARNER CNC300-280/NSK-WARNER CNC300-290/NSK-WARNER CNC300-300/NSK-WARNER CNC350-310/NSK-WARNER CNC350-320/NSK-WARNER CNC350-330/NSK-WARNER CNC350-340/NSK-WARNER CNC350-350
