Continental FD 330-22 CI G1/4 Industrial Rubber Convoluted Air Spring
Refer NO.
Contitech FD 330-22 CI G1/4
Contitech FD 330 22 CI G1/4
Contitech FD330-22 CI G1/4
Contitech FD330 22 CI G1/4
Contitech FD330-22CIG1/4
Specifications and Tecnical Data
1. Nut/blind nut Top plate screw (nut) teeth: 2 x M8
Top plate screw center distance: 157.5mm
2. Bottom cover plate screw (nut) teeth: 2 x M8
Bottom plate screw center distance : 157.5mm
2. Air hole/air inlet/air fitting air hole/air inlet: G1/84
Screw Center Distance Between Gas Hole and Nut : 73mm
3. Top plate diameter (width): 228 mm, bottom cover diameter (width): 228 mm
4. Max. OD: 325mm
DR: 340mm
4. Bumper block/bumper block without bumper
5. Belt loop/belt loop with belt loop: with one piece of belt loop
Min. pressure: 0 bar
Return force to min.height: ≤300N
Overall weight with clamped plates: 4.8kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 240mm, minimum 220mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 10 | 13.3 | 16.7 | 20.6 | 24.1 | 27.6 | 12 |
| Spring rate [N/mm] | 159 | 190 | 221 | 252 | 283 | 314 | |
| Natural frequency [Hz] | 2.0 | 1.9 | 1.8 | 1.8 | 1.7 | 1.7 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 265 | 7.97 | 10.8 | 13.5 | 16.9 | 19.7 | 22.7 | 13 |
| 220 | 11.3 | 15.2 | 18.9 | 23.1 | 26.9 | 30.8 | 11 | |
| 180 | 13.6 | 18.2 | 22.7 | 27.5 | 32 | 36.5 | 8.8 | |
| 140 | 15.4 | 20.5 | 25.5 | 31.1 | 36.3 | 41.3 | 6.8 | |
| 100 | 16.8 | 22.1 | 27.8 | 34.1 | 39.8 | 45 | 4.8 | |
Other Types Of Contitech Convoluted Air Spring Replacement We Could Offer:
| FS 120-9 3/4 M8 | FD 200-25 427 | FD 530-35 545 |
| FS 120-9 1/4 M8 | FD 200-25 454 | FD 530-35 720 |
| FS 200-10 3/4 M8 | FD 200-25 | FD 120-17 509 |
| FS 200-10 1/4 | FD 200-19 | FD 40-10 |
| FS 200-10 | FD 200-25 453 | FD 70-13 |
| FS 70-7 1/4 M8 | FD 200-25 426 | FD 120-17 |
| FS 330-11 474 | FD 200-25 427 | FD 200-22 510 |
| FS 330-11 | FD 200-25 463 | FD 200-22 706 |
| FS 330-11 468 | FD 200-25 429 | FT 330-29 546 |
| FS 330-14 | FD 200-25 507 | FT 330-29 547 |
| FS 330-11 647 | FD 200-25 511 | FT 330-29 520 |
| FS 40-6 1/8 M8 | FD 200-25 717 | FT 330-29 430 |
| FS120-10 | FD 330-22 363 | FT 330-29 431 |
| 1B8-580 | FD 330-22 472 | FT 330-29 432 |
| FD 200-19 504 | FD 330-22 471 | FT 330-29 433 |
| FD 200-19 | FD 330-22 500 | FT 330-29 469 |
| FD 200-19 724 | FD 330-22 313 | FT 330-29 466 |
| FD 200-19 539 | FD 330-22 337 | FT 330-29 498 |
| FD 200-19 505 | FD 330-22 318 | FT 412-323 |
| FD 200-19 319 | FD 330-22 346 | FT 210-32 |
| FD 200-19 310 | FD 330-22 364 | FD 330-22 364 |
| FD 200-19 315 | FD 330-22 365 | |
| FD 200-19 362 | FD 330-22 366 | |
| FD 200-19 320 | FD 330-22 367 | |
| FD 200-19 504 | FD 330-22 331 | |
| FD 200-19 452 | FD 330-22 368 | |
| FD 200-19 499 | FD 330-22 327 | |
| FD 200-19 450 | FD 330-22 343 | |
| FD 200-19 448 | FD 330-22 334 | |
| FD 200-19 506 | FD 330-22 363 | |
| FD 200-19 510 | FD 530-22 321 | |
| FD 200-22 524 | FD 330-30-371 | |
| FD 200-19 P04 | FD 331-26-514 | |
| FD 200-19 315 | FD 331-26-541 | |
| FD 120-20 | FD 331-26-480 | |
| FD 120-20 509 | FD 530-35 545 | |
| FD 120-20 509 | FD 530-35 543 | |
| FD 200-25 | FD 530-35 530 |
The related picture
Air Springs
Rubber air springs use rubber elasticity and air pressure to obtain comprehensive shock absorption, shock absorption, shock isolation, noise prevention and cushioning performance. According to the sealing structure, it is divided into four categories: pressure self-sealing type, rim clamping type, hoop sealing type and hybrid type. The load of the rubber air spring is mainly borne by the cord, and the number of layers of the cord is mainly composed of 2 layers. The product is required to consist of 4 layers of cord. The inner layer of rubber is mainly used for sealing, and the outer layer of rubber is not only for sealing, but also for protection.
This rubber air spring can be used in vibration damping equipment. It can better achieve vibration isolation and ensure the safety and stability of the base and control system of the vibration equipment by utilizing the characteristics of high frequency vibration isolation, sound insulation and low natural vibration frequency. Such as vibration isolation of vibrating screens, vibration reduction of luxury vehicle seats and other equipment.
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
Send Message
