FS 200-10CI Contitech Convoluted Air Spring Max.OD 250mm Rubber Actuator
OEM NO.
Contitech FS 200-10
Contitech FS200-10
Contitech FS 200 10
Contitech FS200 10
Contitech FS 20010
Contitech FS20010
Continental FS 200-10 CI
Continental FS 200 10 CI
Continental FS 20010CI
Specifications and Detailed Technical Parameters:FS 200-10 CI Rubber Air Actuator
Top/Bottom cover plate diameter: 161mm
The Blind Nut/Nut/Teeth of the top/bottom plate: 2×M8
The screw center distance: 89mm
The Max.OD diameter: 250mm
DR: 265mm
Min. Height: 51mm
Max. Height: 140mm
Min. pressure: 0 bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 2.3kg
Type | Order No. |
Rubber bellows only | 72850 |
with crimped plates, G1/4 air inlet (A) 44.5 mm excentrical | 60030 |
with crimped plates and bumper (A) 44.5 mm excentrical | 2681047000 |
with crimped plates, G3/4 air inlet (A) 38.1 mm excentrical | 2681045000 |
with stainless steel crimped plates, G3/4 air inlet (A) 38.1 mm excentrical | 69695 |
Factors affecting the elastic characteristics of air springs
1. Cord angle
2. Cord spacing
3. Number of cord layers
4. Inflatable air pressure
5. Influence of additional air chamber
About air spring production knowledge
Rubber lining is a retractable inner mold with different shapes formed by the polymer properties of vulcanized rubber and high-strength fiber cloth. It is a product made of vulcanized rubber and fibers. It is compressive, elastic and airtight. After being filled with compressed air, the air bag will expand to meet the design requirements of its cross-section. Under the premise of ensuring quality, if it is used improperly, the service life of the air spring will be greatly shortened.
Due to its low quality, good comfort and fatigue resistance, the rubber air spring has the advantages of long service life, vibration reduction and noise reduction. Widely used in, industrial machinery, instrumentation and other equipment.
The production process and production process of the surface fabric of the air spring machine penetrate into the gap of the fabric, and the bonding of the process rubber and the fabric of the rubber rope formed by tight carding. Reduce shrinkage: The elastic deformation of the rubber should be reduced, so that the surface of the pressed rubber wire is smooth and the dimensional change is small. The air spring film required for the production of air springs usually uses a three-roller air spring machine. Through this process, it embodies the protection of the air spring in many ways, thus prolonging its service life.
The related picture of FS 200-10 CI 1 Convoluted Air Spring
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
Send Message
