Contitech FD 200-19 P04 895 N Replacement Double Convoluted Rubber Air Spring Assembly
Refer No.
Contitech FD 200-19 P04 895 N
Contitech FD 200 19 P04 895 N
Specifications and Detailed Technical Parameters:AIRSUSTECH 2B5235
- Nut/blind nut
Top plate screw (nut) teeth: 2×M10×1.5
The screw center distance on the top plate: 85mm
Screw (nut) teeth of the bottom cover plate: 2×M10×1.5,M14×2.0
- Air hole/air inlet/air fittings
Air hole/air inlet: ZG1/2
The distance between the screw and the air inlet: middle in the screw center
- Cover plate
Top plate diameter: 160 mm
Diameter of the bottom cover: 160 mm
- Bell rubber bellows
Rubber Bellow Natural Diameter: 224mm
Max Diameter: 251mm
Height: 210mm
- Bumper block/bumper block
With bumper block
- Belt loop/Belt loop
With belt loop: one piece of belt loop
Min. pressure: 0 bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 3.0kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 210mm, minimum 195mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 5.2 | 7.1 | 9.0 | 10.7 | 12.4 | 14.5 | 5.2 |
| Spring rate [N/cm] | 795 | 1030 | 1265 | 1500 | 1735 | 1970 | |
| Natural frequency [Hz] | 2.0 | 1.9 | 1.9 | 1.9 | 1.9 | 1.9 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 230 | 4.1 | 5.6 | 7.2 | 8.8 | 10.1 | 12.0 | 5.8 |
| 200 | 5.7 | 7.7 | 9.6 | 11.6 | 13.5 | 15.6 | 5.3 | |
| 170 | 7.2 | 9.4 | 11.7 | 14.2 | 16.5 | 18.9 | 4.6 | |
| 140 | 8.4 | 10.9 | 13.7 | 16.4 | 19.0 | 21.5 | 3.9 | |
| 110 | 9.4 | 12.4 | 15.4 | 18.3 | 21.3 | 24.1 | 3.0 | |
| 80 | 10.3 | 13.4 | 16.9 | 19.7 | 23.0 | 25.8 | 2.1 | |
Other Types Of Contitech Convoluted Air Spring Replacement We Could Offer:
| FS 120-9 3/4 M8 | FD 200-25 427 | FD 530-35 545 |
FS 120-9 1/4 M8 | FD 200-25 454 | FD 530-35 720 |
FS 200-10 3/4 M8 | FD 200-25 | FD 120-17 509 |
FS 200-10 1/4 | FD 200-19 | FD 40-10 |
FS 200-10 | FD 200-25 453 | FD 70-13 |
FS 70-7 1/4 M8 | FD 200-25 426 | FD 120-17 |
FS 330-11 474 | FD 200-25 427 | FD 200-22 510 |
FS 330-11 | FD 200-25 463 | FD 200-22 706 |
FS 330-11 468 | FD 200-25 429 | FT 330-29 546 |
FS 330-14 | FD 200-25 507 | FT 330-29 547 |
FS 330-11 647 | FD 200-25 511 | FT 330-29 520 |
FS 40-6 1/8 M8 | FD 200-25 717 | FT 330-29 430 |
FS120-10 | FD 330-22 363 | FT 330-29 431 |
1B8-580 | FD 330-22 472 | FT 330-29 432 |
FD 200-19 504 | FD 330-22 471 | FT 330-29 433 |
FD 200-19 | FD 330-22 500 | FT 330-29 469 |
FD 200-19 724 | FD 330-22 313 | FT 330-29 466 |
FD 200-19 539 | FD 330-22 337 | FT 330-29 498 |
FD 200-19 505 | FD 330-22 318 | FT 412-323 |
FD 200-19 319 | FD 330-22 346 | FT 210-32 |
FD 200-19 310 | FD 330-22 364 | FD 330-22 364 |
FD 200-19 315 | FD 330-22 365 | |
FD 200-19 362 | FD 330-22 366 | |
FD 200-19 320 | FD 330-22 367 | |
FD 200-19 504 | FD 330-22 331 | |
FD 200-19 452 | FD 330-22 368 | |
FD 200-19 499 | FD 330-22 327 | |
FD 200-19 450 | FD 330-22 343 | |
FD 200-19 448 | FD 330-22 334 | |
FD 200-19 506 | FD 330-22 363 | |
FD 200-19 510 | FD 530-22 321 | |
FD 200-22 524 | FD 330-30-371 | |
FD 200-19 P04 | FD 331-26-514 | |
FD 200-19 315 | FD 331-26-541 | |
FD 120-20 | FD 331-26-480 | |
FD 120-20 509 | FD 530-35 545 | |
FD 120-20 509 | FD 530-35 543 | |
FD 200-25 | FD 530-35 530 |
The related picture of 2B5235
Company Profile
Guangzhou Guomat air spring Co., Ltd. is a domestic innovative enterprise dedicated to the research and production of automotive air springs. It is located in the beautiful flower city of Guangzhou. With modern workshops and advanced rubber air spring manufacturing equipment, it is one of the current air spring production bases in China. Our products are mainly used in the bases of commercial vehicles, passenger cars, and industrial machinery and equipment. The main products are: rubber air springs, passenger car and truck airbags, industrial airbags, air springs for papermaking machinery, large washing machines, rubber air springs for cars, etc. There are thousands of models and styles, and can also be customized according to customer requirements. Or the customer's existing product specifications to design and produce.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
Send Message
