Fire-stone WO13587564 Goodyear 1B8-550 Continental FS120-10CI1/4NPT CA Air Spring Shocks
Refer Number
Contitech: FS120-10
Contitech: FS 120-10
Contitech: FS120 10
Contitech: FS 120 10
Contitech: FS12010
Continental FS 120-10 CI 1/4 NPT
Continental FS 120-10 CI 1/4 NPT CA
Continental FS120-10CI1/4NPTCA
Goodyear: 1B8-550
Goodyear: 1B8 550
Fire-stone: W01-358-7564
Fire-stone: W01 358 7564
Fire-stone: W013587564
Fire-stone: WO1-358-7564
Fire-stone: WO1 358 7564
Fire-stone: WO13587564
Fire-stone: w01-358-7564
Fire-stone: w01 358 7564
Fire-stone: w013587564
The detailed Specifications and techical data: 1B8×4
The Max. OD: 230mm
Air hole/Air inlet/Air fittings: 1/4NPTF
The air hole/air inlet/ air fittings is in the middle of the screw center
Working Stroke: maximum 140mm to minimum 50mm
Top/Bottom cover diameter: 135mm
Top/Bottom screw(nut) teeth: 2×3/8-16UNC
Screw center distance: 35mm
Min. pressure: 0 bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 2.0kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 110mm, minimum 90mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 3.9 | 5.3 | 6.8 | 8.3 | 9.6 | 10.9 | 1.8 |
| Spring rate [N/cm] | 1315 | 1620 | 1925 | 2230 | 2535 | 2840 | |
| Natural frequency [Hz] | 2.9 | 2.8 | 2.7 | 2.6 | 2.6 | 2.6 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 120 | 3.1 | 4.3 | 5.6 | 6.9 | 8.0 | 9.2 | 1.9 |
| 110 | 3.9 | 5.3 | 6.8 | 8.3 | 9.6 | 10.9 | 1.8 | |
| 100 | 4.5 | 6.1 | 7.9 | 9.7 | 11.0 | 12.4 | 1.7 | |
| 90 | 5.0 | 6.8 | 8.9 | 10.8 | 12.2 | 13.8 | 1.5 | |
| 80 | 5.5 | 7.4 | 9.7 | 11.6 | 13.3 | 15.0 | 1.3 | |
| 70 | 5.9 | 7.9 | 10.3 | 12.3 | 14.2 | 16.0 | 1.1 | |
| 60 | 6.3 | 8.2 | 10.7 | 13.0 | 15.0 | 17.0 | 0.9 | |
About rubber air spring
The key component with shock absorption in the rubber shock absorber is rubber. It can be said that rubber has the effect of shock absorption, sound insulation and noise reduction. This is also because of the characteristics of rubber, the high elastic polymer raw material with reversible deformation, and the compression that will quickly bear the external force at room temperature and restore the original state in an instant.
Rubber air springs: can be used in both vehicles and industrial equipment. It has better shock absorption and impact resistance than metal torsion springs. Its structure uses the cloth curtain layer as the compression layer, with an air-tight rubber layer inside and a maintenance rubber layer that is resistant to acid and alkali and anti-aging.
The reated picture
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
Send Message
