20CrMnTi/20CrMnMo for your choice
CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009
Ductile iron QT450-10 according to standard GB/T 1348-2009
Cast steel ZG310-570 according to standard GB/T 5613-2014
SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.
POWER
To ensure the correct use of the product we recommend to pay attention to the specifications mentioned on our technical
sheet.Consider also the input rotation speed,the power input and the transmission ratios.Where the rotation or other working
conditions are different, please get in touch with the LongQuan technical department.
LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on our catalog and the
first replacement must be done after 50-60 hours of running, then replaced after 600-800 working hours.
The emptying of the gearbox should be made immediately after the working, with the oil still hot, to avoid the deposition
of sludge. Check frequently the oil level and top up the oil whenever necessary.
A gearbox for a square hay baler is a mechanical device that uses gears to transmit power from the tractor's PTO shaft to the baler's mechanisms. The gearbox typically has three main components: an input shaft, an output shaft, and a series of gears. The input shaft is connected to the tractor's PTO shaft, and the output shaft is connected to the baler's mechanisms. The gears in between transmit power from the input shaft to the output shaft.
The gearbox is an important part of the square hay baler, as it allows the baler to operate at the correct speed and torque. The gearbox is also responsible for protecting the baler's mechanisms from damage.
There are a few different types of gearboxes that can be used on a square hay baler. The most common type is the planetary gearbox. Planetary gearboxes are compact and efficient, and they are well-suited for use in agricultural applications.
Another type of gearbox that can be used on a square hay baler is the helical gearbox. Helical gearboxes are more expensive than planetary gearboxes, but they offer greater efficiency and durability.
The type of gearbox that is best for a particular square hay baler will depend on the baler's size, power requirements, and budget.
Here are some of the advantages of using a gearbox for a square hay baler:
- Increased efficiency. The gearbox allows the baler to operate at the correct speed and torque, which can improve efficiency.
- Reduced wear and tear. The gearbox protects the baler's mechanisms from damage, which can reduce wear and tear.
- Extended lifespan. The gearbox can help to extend the lifespan of the baler by protecting it from damage.
- Improved safety. The gearbox can help to improve safety by reducing the risk of operator injury.
If you are looking for a way to increase the efficiency, lifespan, and safety of your square hay baler, then using a gearbox is a great option.
Send Message
