Model NO.
XW6
Trademark
XBURS
Origin
Wenzhou, Zhejiang, China
HS Code
8483409000
Production Capacity
100, 000
Type:
Worm Gear Box
Protection Level:
IP67
Working Temperature:
-20 to 120 Degrees Celsius
Applications:
Ball Valves, Butterfly Valves, Plug Valves, Damper
Painting/Coating:
Silver Grey or Customization
Transport Package:
Plywood Case
Model:XW6 Part-turn Electrical-Operator Worm Gearbox
Introduction
Part-turn worm gearboxes used for applications such as Ball Valves, Butterfly Valves, Plug Valves, Dampers.
Characters
1. Totally enclosed gearing with good sealing
2. Ductile cast iron housing, reliable strength
3. Grease filled, increase the service life
4. Optional input structure, flexible input mode
5. Optional ratio of double-stage gearbox, used in a wide range
6. Adjustable angle of output end cap, flexible modes of installation
7. Optional output flange type
8. High performance of tapered roller bearing, can withstand axial and also radial forces
9. Sealed structure, good waterproof effect, can be up to IP68 if required
10. Adjustable stopper, 0 °and 90 °(±5 °adjustable)
Operating Environment
XW series part-turn worm gearbox are with good mechanical quality and steady operating performance which apply to deal with variety climate and temperature. We strive to develop XW series worm gear operator to meet higher demands.
Enclosure: IP67 standard (Optional IP68 as required)
Working Temperature: From -20ºC to 120ºC ( -4ºFto 248ºF)
Painting: Silver grey (Customization)
Connect With Valve
The flange connecting to valve is according to ENISO5210 or DIN3210 (Customization)
Introduction
Part-turn worm gearboxes used for applications such as Ball Valves, Butterfly Valves, Plug Valves, Dampers.
- The maximum out-torque is up to 7000 Nm;
- The ratio is 70:1.
Characters
1. Totally enclosed gearing with good sealing
2. Ductile cast iron housing, reliable strength
3. Grease filled, increase the service life
4. Optional input structure, flexible input mode
5. Optional ratio of double-stage gearbox, used in a wide range
6. Adjustable angle of output end cap, flexible modes of installation
7. Optional output flange type
8. High performance of tapered roller bearing, can withstand axial and also radial forces
9. Sealed structure, good waterproof effect, can be up to IP68 if required
10. Adjustable stopper, 0 °and 90 °(±5 °adjustable)
Operating Environment
XW series part-turn worm gearbox are with good mechanical quality and steady operating performance which apply to deal with variety climate and temperature. We strive to develop XW series worm gear operator to meet higher demands.
Enclosure: IP67 standard (Optional IP68 as required)
Working Temperature: From -20ºC to 120ºC ( -4ºFto 248ºF)
Painting: Silver grey (Customization)
Connect With Valve
The flange connecting to valve is according to ENISO5210 or DIN3210 (Customization)
Send Message
