1219-8406 DC Excited Controller with Curtis 36/48V 600A Compatible with Electric Forklift, 1219-8406 DC Controller, Electric Forklift Controller

Notice: For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS 1214/15/19-8 Manual before making the purchase.

Notice: By default, we will deliver the controller with default setting of 36-48V / 600A / 0-5kΩ (throttle type "3"). For better applying the controller to your system, the buyer should confirm with the seller the battery system voltage and the throttle type (0-5kΩ, 5k-0Ω or 0 - 5V, etc). If you need to modify any controller parameter, please leave us a message while you make the purchase. There is no extra cost for reprogramming the controller.

Overview:

CURTIS 1219-8406 programmable motor speed controllers provide efficient, cost-effective, and simple-to-install control for a variety of large industrial vehicles. Typical applications include walkie/rider pallet trucks, fork lifts, stackers, reach trucks, and other industrial trucks. The 1207-based microprocessor logic section combined with a CURTIS MOSFET power section gives the 1219-8406 controller high power and advanced features in a rugged, compact package.

1219-8406 controllers are flexible in variable applications, with the added functionality of being programmable-via the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station. This means the controllers can be tailored to the needs of specific applications. In addition to configuration flexibility, use of the programmer offers diagnostic and test capability.

Key Features:

• CURTIS Model: 1219-8406 (HELI forklift controller model: DQKC-025)
• Norminal Battery Voltage (Volts): wide working voltage 36 - 48V
• 2 Minute Current Rating (amps): 600
• Under Voltage Cutback (Volts): 21V
• Contactor Voltage (Volts): battery voltage
• Throttle Type: 0-5K Ω (throttle type "3", default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kΩ-0, 0-5kΩ, 0-5V, 0-10V, inductive, Hall, etc.
• Ambient Operating Temperature Range: -40°C to 50°C
• Heatsink Overtemperature Cutback: 85°C
• Heatsink Undertemperature Cutback: -25°C
• Dimensions: L309xW180xH82 mm
• Net Weight: about 4.5 kg

Features Include:

• Power MOSFET design, providing
  • infinitely variable drive and plug brake control
  • silent high-frequency operation
  • high efficiency (for reduced motor and battery losses)
• Overvoltage and undervoltage protection
• Thermal protection/compensation circuitry that provides undertemperature cutback, constant current limit over operating range, and linear rollback in overtemperature-thus preventing sudden power loss regardless of thermal conditions
• Diagnostic and test information for the controller-and other system components-readily available through both an on-board LED and the optional handheld programmer
• Meets or exceeds EEC fault detect requirements, with circuitry and software to detect faults in the throttle circuit, MOSFET drive circuits, MOSFET output, contactor drivers, and contactors
• Programmable input sequencing options include several combinations of neutral start and static return to off (SRO)
• Arcless contactor switching with microprocessor-controlled contactor sequencing
• Smooth, controlled plug braking-with either variable (throttledependent) or fixed plug current limit
• Neutral braking option provides automatic plug braking in neutral
• MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions
• Emergency reverse (belly button switch) provides full function with a single input
• Anti-rollback (ramp start) provides full power for starting on ramps
• Simple contactor and switch wiring, with coil drivers monitored for shorts and open circuits-thus ensuring fail-safe operation
• Flexible throttle circuitry accommodates a variety of throttle types: 5kΩ-0, 0-5kΩ, 0-5V, 0-10V, inductive, Hall, etc.
• Programmable "ramp shape" (static throttle map) provides flexibility in selecting throttle response feel
• Sealed package, providing environmental protection
• Power connections made by tin-plated solid copper busses, with a polarized Molex connector for control signals
• Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
• Rugged anodized aluminum extruded housing meets IP65 environmental sealing standards for use in harsh environments.