| Rated Voltage | DC12V | |||
| Operating Voltage Range | DC10.5V~16V | |||
| Short-term Maximum Power Consumption | 5.6A | |||
| Average Power Consumption | 1.3A | |||
| Gas Heat Power (W) | 2000 | 4000 | 6000 | |
| Fuel Consumption (g/H) | 160 | 320 | 480 | |
| Gas Pressure | 30mbar | |||
| Warm Air Delivery Volume m3/H | 287max | |||
| Water Tank Capacity | 10L | |||
| Maximum Pressure of Water Pump | 2.8bar | |||
| Maximum Pressure of System | 4.5bar | |||
| Rated Electric Supply Voltage | 110V | |||
| Electrical Heating Power | 900W | 1800W | ||
| Electrical Power Dissipation | 3.9A | 7.8A | ||
| Working (Environment) Temperature | -25ºC~+80ºC | |||
| Working Altitude | ≤1500m | |||
| Weight (Kg) | 15.6Kg | |||
| Dimensions (mm) | 510×450×300 | |||
The heater is a hot water and warm air integrated machine, which can provide domestic hot water while heating the occupants. This heater allows use during driving. This heater also has the function of using local electricity heating.
In hot water warm air work mode, this heater can be used to heat both the room and the hot water. If only hot water is needed, please choose hot water working mode.
When the ambient temperature is below 3°C, please empty the water in the water tank to prevent freezing of the water tank.
There are three energy options to choose from:
-- Gas Mode
Heater automatic adjust the power.
--Electrical Mode
Manually select the 900W or 1800W heating mode according to the power supply capacity of the RV camp.
--Hybrid Mode
When the power demand is low (for example, maintaining the room temperature stage), the electrical heating is preferred. Until the city electricity cannot meet, the gas heating is started, and the gas heating function is turned off first in the power adjustment phase.
In hot water working mode,gas mode or electrical mode is used to heat the tank.The tank temperature can be set to 40°C or 60°C.
-- Gas Mode
The heater operates at the lowest power. Stop heating immediately after reaching the set temperature.
--Electrical Mode
Manually select the 900W or 1800W heating mode according to the power supply capacity of the camp site.
Safety Instructions
The gas obtained from the liquefied gas tank is mandatory to be in a gaseous state. Liquefied gas is not allowed to avoid danger.
If a gas leak occurs or smells of gas:
--Immediately extinguish the open flame
--Open doors and windows
--Close all valves, liquefied gas tanks
--No smoking
--Do not operate any electrical switches
--Ask the professional to thoroughly check the gas system
--Do not use our company's special accessories
Working Principle
There are three modes you can choose
NF combi heater has CE
Hebei Nanfeng Automobile Equipment (Group) Co., Ltd is a group company with 5 factories, that specially produce parking heaters, heater parts, air conditioner and electric vehicle parts for more than 30 years. We are the leading auto parts manufacturers in China.
Our factory's production units are equipped with high tech machineries, strict quality,control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us among the only few companies in the world acquiring such high level certifications. Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
FAQQ1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
Send Message
