Model NO.
SC150/150
Type
Guide Tracked
Load Capacity
1T - 2T
Speed
20M/Min - 40M/Min
Usage
Construction Hoist
Sling Type
Cable
Lift Drive / Actuation
Electric Motor
Attendant
Without Attendant
Deceleration Device
With Deceleration Device
Elevator Door
Straight Fractional Door
Mast Section Size
0.65*0.65*1.508m/0.8*0.8*1.508m
Color
Red
Lifing Speed
36 M/Min
Cabin Size
3.2 X 1.5 X 2.5 M (L*W*H)
Height
50m
Payload Capacity
1000kgs
Motor Power
3*11kw
Enclosure
Included
Trademark
RC
Transport Package
by Container, Nude Packed, Well Fixed
Specification
1.5t load capacity, double cage
Origin
Shandong, China
HS Code
8428109000
1. Personnel and materials construction building lifting equipment, construction tool equipment construction hoist of common models:
| Characteristic | Model | Rated Loading | Lifting Speed | Motor Power |
| Double cabin | SC200/200 | 2×2000kg | 33m/min | 2×(3×11kw) |
| SC150/150 | 2×1500kg | 33m/min | 2×(2×15kw) | |
| SC100/100 | 2×1000kg | 33m/min | 2×(2×11kw) | |
| Single cabin | SC200 | 2000kg | 33m/min | 3×11kw |
| SC150 | 1500kg | 33m/min | 2×15kw | |
| SC100 | 1000kg | 33m/min | 2×11kw |
2. Personnel and materials construction building lifting equipment, construction tool equipment construction hoist with Interver:
| Characteristics | Model | Rated Loading | Lifting Speed | Motor Power | |
| Double Cabin | Low-speed | SC200/200D | 2×2000kg | 0-33m/min | 2×(3×11kw) |
| SC100/100D | 2×1000kg | 0-33m/min | 2×(2×11kw) | ||
| Mid-speed | SC200/200Z | 2×2000kg | 0-55m/min | 2×(2×11kw) | |
| SC100/100Z | 2×1000kg | 0-55m/min | 2×(2×11kw) | ||
| Single Cabin | Low-speed | SC200D | 2000kg | 0-33m/min | 3×11kw |
| SC100D | 1000kg | 0-33m/min | 2×11kw | ||
| Mid-speed | SC200Z | 2000kg | 0-55m/min | 2×11kw | |
| SC100Z | 1000kg | 0-55m/min | 2×11kw | ||
A. Special design for the construction passenger hoist cage:
The cage is boarded up by all punched aluminium sheet (anti-aging, anti-rust, lightweight and beautiful) or punched steel sheet (stable). The main structure of cage is made of high quality steel after bending. The bended steel is firm, stability, moreover it can ensure stability for the whole structure.
1. Bottom and roof of cage adopt trapezoidal frame. Bottom and the roof are full symmetry.
2. The plane of symmetry are connected by Bending plate, bending channel and square pipe which make it firm, straight and balance in use.
3. The wall around cage can be fixed by punched aluminum plate, punched zinc plate, punched steel plate, steel wire mesh.
4. Surface treatment: blasting, baking finished, galvanized.
(Optional Size:3x1.5x2.1m, 3x1.3x2.1m, 3.2x1.5x2.1m, 3.2x1.3x2.1m, 3x1.5x2.4m, 3x1.3x2.4m, 3.2x1.5x2.4m, 3.2x1.3x2.4m etc.)
B. Mast section with rack for the construction passenger hoist :
I: About the mast section:
The Mast section (color is variable) is made of seamless tube or HF welded tube.
1. Steel plates are bented of U-shape to strengthen the mast section.
2. Mast section with galvanized coat or heat spray coat can be chosen.
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm (Thickness of 6mm or 8mm is also available).
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:
450*450*1508mm, 650*900*1508mm,800*800*1508mm
construction hoist lifting The mast section can be customized according to customers' requirements (drawing, specifications and so on).
C. Mast section with rack for the construction passenger hoist :
I: About the mast section:
The Mast section (color is variable) is made of seamless tube or HF welded tube.
1. Steel plates are bented of U-shape to strengthen the mast section.
2. Mast section with galvanized coat or heat spray coat can be chosen.
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm
(Thickness of 6mm or 8mm is also available).
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:
450*450*1508mm, 650*900*1508mm,800*800*1508mm
About the mast section:
The Mast section (color is variable) is made of seamless tube or HF welded tube.
1. Steel plates are bented of U-shape to strengthen the mast section.
2. Mast section with galvanized coat or heat spray coat can be chosen.
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm
(Thickness of 6mm or 8mm is also available).
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:
450*450*1508mm, 650*900*1508mm,800*800*1508mm
Mast section
B. Mast section with rack for the construction passenger hoist :
I: About the mast section:
The Mast section (color is variable) is made of seamless tube or HF welded tube.
1. Steel plates are bented of U-shape to strengthen the mast section.
2. Mast section with galvanized coat or heat spray coat can be chosen.
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm (Thickness of 6mm or 8mm is also available).
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:
450*450*1508mm, 650*900*1508mm,800*800*1508mm
construction hoist lifting The mast section can be customized according to customers' requirements (drawing, specifications and so on).
C. Mast section with rack for the construction passenger hoist :
I: About the mast section:
The Mast section (color is variable) is made of seamless tube or HF welded tube.
1. Steel plates are bented of U-shape to strengthen the mast section.
2. Mast section with galvanized coat or heat spray coat can be chosen.
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm
(Thickness of 6mm or 8mm is also available).
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:
450*450*1508mm, 650*900*1508mm,800*800*1508mm
Spare parts
