Model NO.
FUJI-E
Cascade Level
Two
Driving Type
AC Elevator
Railing Form
EX-P
Step Road Linetype
Linear
Production Time
Within 25-30 Days
Transport Package
High Quality Export Wooden Case
Specification
Hairline Stainless Steel
Trademark
FUJI
Origin
China
HS Code
8428400000
Type:
Heavy
Load Capacity:
9000 Persons/H
Use of Occasions:
Public Traffic
Speed:
0.5M/S
Slope Angle:
30°
Width of Stair:
600-1200 mm
About Good Quality Modern Design Automatic Mechanical Escalator for Center
The escalator is a combination of a special structure type chain conveyor and two special structure type belt conveyors, with circular moving stairway, which is used to carry passengers upward or downward between different levels of the building. A continuous conveyance mechanism for carrying people up and down.
It can be widely used in stations, terminals, shopping malls, airports and places where
people are concentrated.
30° Escalator Parameter
| Model | Travelling height(mm) | Net weight KN | Supporting | Transport size | ||
| R1KN | R2KN | H | I | |||
| (3600pers/h) Speed:0.5m/s | 3000 | 57 | 46 | 41 | 2750 | 10900 |
| 3500 | 60 | 49 | 44 | 2780 | 11890 | |
| 4000 | 64 | 52 | 47 | 2810 | 12880 | |
| 4500 | 68 | 56 | 50 | 2830 | 13870 | |
| 5000 | 71 | 59 | 53 | 2840 | 14860 | |
| 5500 | 75 | 62 | 56 | 2860 | 15860 | |
| 6000 | 79 | 65 | 59 | 2870 | 16860 | |
| (4800pers/h) Speed:0.5m/s | 3000 | 59 | 49 | 47 | 2750 | 10900 |
| 3500 | 63 | 52 | 50 | 2780 | 11890 | |
| 4000 | 67 | 56 | 54 | 2810 | 12880 | |
| 4500 | 71 | 64 | 57 | 2830 | 13870 | |
| 5000 | 74 | 68 | 60 | 2840 | 14860 | |
| 5500 | 82 | 71 | 66 | 2860 | 15860 | |
| 6000 | 86 | 78 | 69 | 2870 | 16860 | |
| (6000pers/h) Speed:0.5m/s | 3000 | 63 | 59 | 53 | 2750 | 10900 |
| 3500 | 67 | 64 | 57 | 2780 | 11890 | |
| 4000 | 71 | 68 | 61 | 2810 | 12880 | |
| 4500 | 75 | 73 | 65 | 2830 | 13870 | |
| 5000 | 83 | 79 | 71 | 2840 | 14860 | |
| 5500 | 87 | 84 | 75 | 2860 | 15860 | |
| 6000 | 92 | 88 | 79 | 2870 | 16860 | |
35° Escalator Parameter
| Model | Travelling height(mm) | Net weight KN | Supporting | Transport size | ||
| R1KN | R2KN | H | I | |||
| (3600pers/h) Speed:0.5m/s | 3000 | 54 | 43 | 39 | 2850 | 10180 |
| 3500 | 57 | 46 | 41 | 2890 | 11030 | |
| 4000 | 60 | 49 | 44 | 2920 | 11890 | |
| 4500 | 64 | 52 | 46 | 2940 | 12750 | |
| 5000 | 67 | 54 | 49 | 2970 | 13610 | |
| 5500 | 70 | 57 | 51 | 2980 | 14470 | |
| 6000 | 73 | 60 | 54 | 3000 | 15330 | |
| (4800pers/h) Speed:0.5m/s | 3000 | 56 | 49 | 44 | 2850 | 10180 |
| 3500 | 60 | 52 | 47 | 2890 | 11030 | |
| 4000 | 63 | 56 | 50 | 2920 | 11890 | |
| 4500 | 66 | 59 | 53 | 2940 | 12750 | |
| 5000 | 70 | 62 | 56 | 2970 | 13610 | |
| 5500 | 73 | 65 | 59 | 2980 | 14470 | |
| 6000 | 76 | 69 | 61 | 3000 | 15330 | |
| (6000pers/h) Speed:0.5m/s | 3000 | 60 | 56 | 50 | 2850 | 10180 |
| 3500 | 64 | 60 | 53 | 2890 | 11030 | |
| 4000 | 67 | 64 | 57 | 2920 | 11890 | |
| 4500 | 71 | 67 | 60 | 2940 | 12750 | |
| 5000 | 74 | 71 | 64 | 2970 | 13610 | |
| 5500 | 82 | 77 | 69 | 2980 | 14470 | |
| 6000 | 85 | 81 | 72 | 3000 | 15330 | |
Generalized parameters
| Installation Environment: | Indoor and Outdoor |
| Layout | According to Construction plans |
| Travel Height | H≤20000mm |
| Step width (mm) | 600, 800, 1000, 1200 |
| Up-down horizontal step | 2/2(35°) , 3/3(30°) |
| Angle of inclination | 35°, 30° |
| Operating speed | 0.5m/s,1.0m/s |
| Start method | VVVF , VVVF+Autostart |
| Step | Stainless steel, Aluminum (standard for outdoor) |
| Color | Natural color, Black |
| Capacity (persons/h) | 4500, 6700, 9000 |
| Step cordon | Yellow paint |
| Driver Traction machine | Worm And Gear |
| Motor protection level | IP 21, IP54 |
| Power Supply | Motor Power: 380V±7%, 50Hz Three Phase Five Wire System Lighting Power: 220V, 50Hz, Single Phase |
| Truss | Angle |
| Installation length | Standard |
| Truss process | Paint process(colour TK005),Hot-dip Galvanizing |
Standard configuration
Instruction
1.when the escalator is installed on the two floor above the pit,cancel,cicil substructure and upper symmetry.
2.in the escalator entry and exit,there should be a full open area,the width is not less than 1238,the depth from the handrail to the front obstacle is not less than 2500.
3.escalator handrail to any obstacle is not less than 500.
4.motor AC380V 50HZ,motor power ee table.
5.a resistor less than 4 ohm grounding device is provided by the user.
6.the power suplly from the user to the escalator main switch requires three phases,five lines(soft wire).
7.all dimensions are millimeter,if there is any change,no notice will be given.
Use of safety hairbrush for escalators:
Used in major markets, shopping malls or subway entrances, installed on both sides of the lower part of the escalator, to prevent potential safety hazards caused by tying objects or shoelaces between the escalator steps and the side panels of the skirt.
Escalator clamping device:
1. Increase the position of the safety brush in conformity with the requirements of national standards and other positions such as steps.
2. The bending is treated as same as the radian of the side board. And ensure that the distance with the steps meet the requirements of national standards.
3. Gently process the ends of each brush. Add brush stop.
4. Ensure sufficient strength during installation, and the total length of the brush top and the side board of escalator meets the standards.
5. The base of the brush and the brush shall meet the standard inclination.
About us
Huzhou fuji elevator company adheres to the advanced international elevator management mode and innovative fruits in technical field.It actively introduces the first-class elevator manufacture equipment.It establishes the perfect and superior product system.It takes the management ideas of "since,creditable,promise-keeping,cooperation and double-win".it is engaged in sci-tech innovation.
It owns multiple original core technologies.At present,the products cover passenger elevator(small machine room,traction type villa elevator),freight elevator.automobile elevator,escalator,moving walk series etc.According to the user's requirements, it executes the market operation mode which integrates the manufacture,sales,installation,repair and maintenance into one.It design and produces different kinds of plural elevators as per the user's actual.
Send Message
