Car Wash System EU type
The car wash system EU type (CF-360) is a car wash machine with tire brushes, which clean the tires during the washing process, improving the car washing completeness. The double powerful mute dryers are used to increase the drying performance. The table below shows the basic information about the car wash system EU type.
Parameters| Model | CF-360 |
| Dimension | L*W*H: 2.4m×3.6m×2.9m |
| Rail length: 9m Rail distance: 3.2m | |
| Assembling Range | L*W*H:10m×3.7m×3.1m |
| Moving Range | L*W: 10000mm×3700mm |
| Voltage | Voltage AC380V 50Hz Capacitance 12KVA |
| Water Supply | DN25mm water flow rate≥80L/min |
| Air Pressure | 0.75~0.9Mpa air flow rate≥0.1m3/min |
| Ground Flatness | Deviation≤10mm |
| Applicable Vehicles | Sedan/jeep/minibus within 10 seats |
| Applicable Car Dimension | L*W*H: 5.4m×2.1m×2.1m |
| Washing Time | Normal washing: 3'20'' Fine washing: 7'10'' |
Advantages
- Full-automatic PLC electronic control system improves the security.
- The corrosion resistance of the galvanized door-shaped frame of the vehicle washing equipment is the 10-20 times that of hot galvanized plate, increasing the service life.
- Two powerful air mute dryers can follow contours of vehicles to improve the drying effect.
- Foam and water wax proportioning system is easy to operate.
- Two-Click washing method simplifies operation.
- Built-in self-diagnose system can recognize and remove obstacles during car washing.
| Standard Devices | Optional Devices |
| Shampoo spray system | Undercarriage wash system |
| Water wax spray system | Automatic washing mode |
| Side and overhead contour-following drying system | |
| Equipment data intellectualization | |
| Self-diagnose system |
The Risense factory includes 6 separate manufacturing workshops spanning a total area of 40,000 square meters. We utilize highly advanced and stable numerical control process technology to process and assemble all components, frames, motors, and non-standard parts for our car wash equipment.
Technical advantages
- Hot dip galvanized technology
Hot dip galvanizing treatment: after rust removal, put the steel workpieces in the 600ºC-melting liquid zinc to form a zinc layer on the surface of the steel member. To prevent corrosion for the steel member less than 5mm, the zinc layer should not be less than 65μm; for those more than 5mm, the zinc layer should not be less than 86μm. The hot-dip galvanized frame of car wash machine is rust and corrosion resistant, which makes the main structure more durable.
- 3DMAX laser-cutting and punching technology
MK car washing technology introduced from Japan and components cut by Japanese 3D laser cutter ensure the precision of the components.
Risense has obtained ISO9001 Quality System Certification, CE Quality Certification and ISO 14001 Environment Certification.
Service
- Pre-sales service
Free product consultation is available and custom car wash solutions will be provided according to your preferences car wash machine type, daily passenger flow, venue size, etc.
- Different service modes
There are two cooperation modes with Risense: agency and distribution. You can become an agent by purchasing more than 10 vehicle wash machines every year and as one of our distributors, you can enjoy a more favorable price.
- Construction drawings design
Our engineers will provide customers with a car washing plant design and construction drawings on the basis of your location, environment and purchased equipment model.
- On-site instruction and training
Our after-sales installation engineers will go to the site and offer customers free installation, testing, operational training and maintenance training.
- After-sales service
1) Installation support. We can assign engineers to visit the site for installation.
2) English manuals and other documents are available for delivery.
3) Lifelong technical support; maintenance service for the complete service life.
4) Warranty: one year for the whole machine.
Send Message
