Model NO.
G1
Condition
New
Machine Size
52cm*38cm*85cm
Net Weight
40kg
After-sales Service:
Online
Warranty:
Online
Application:
Clean Mold, Engine
Cleaning Process:
Dry Ice Cleaning
Feature:
Rust / Corrosion Inhibitor
Function:
The Car Dry Cleaning
Introduction
Cleaning the car engine compartment and surface oil stains,mold with dry ice can obtain a good surface cleaning effect, and there is no damage to the engine pipeline, and there is no impact on the mechanical performance; the aluminum or cast engine block has undergone about 1000 hours of salt spray test and cleaning The previous data has not changed; and after continuous high-intensity dry ice blast cleaning of the engine shell, combustion chamber, and intake valve when the engine temperature is about 160°C, the engine is immediately installed to start and run the test, and the mechanical indicators have no adverse effects , And the measured engine torque is significantly higher than before cleaning, even restored to the factory level, and fuel consumption is significantly reduced.
Specification
| Voltage: 220V | Power: 700W |
| Granular power: 0.4kw | Dry ice tube length: 5 meters |
| Length of air supply pipe: 10 meters | Power cord: 3 meters |
| Machine net weight: 40Kg | Air supply pressure: 0.5-1Mpa (adjustable) |
| Dry ice question grain size: 2mm-3mm | Air supply flow: 5-50/min (adjustable) |
| Motor material: pure copper brushless permanent magnet | Drive mode: brushless permanent magnet synchronous |
Details
About us
Send Message
