HW320D pump tester can test Caterpillar 320D common rail pump, HEUI pump and other common common rail pumps. It can save test models, test conditions and standard test data. Built-in flowmeter (optional) can test pump flow.
Functional introduction
1) Power on into the selection page of the oil pump type, and select CAT320D pump or HEUI and common rail pump
2) click the right upper corner icon to enter the language selection page, and provide Chinese, English and Russian three choices.
3) CAT320D pump test page:Test conditions: cam speed, setting pressure, pulse width, angle, standard oil can be changed.;
Count is the test time, and it can also be set according to need.
Cam type: optional 4 cylinder or 6 cylinder.
4) Click model input bar, enter the model selection page.:
On model selection page, you can add and delete models,password,123
After adding the new pump model, click ok entering the test page, the test conditions and standard data can be edited again.
5) click the settings button on the test page to enter the parameter settings page,
Flowmeter coefficient, rail pressure sensor parameters, solenoid valve driving parameters and PID (pressure rising speed) can be set.
6) After the setting is completed, connect the plug and you can start testing.
a, start the motor, adjust the speed and the set cam speed;
b, After the speed is stable, click Starts and the test starts;
c, Observe the pressure and flow of each working condition;
7):HEUI and common rail pump test page:This page only provides an open loop test.
Start the motor, click the start button, change the current of ZME and DRV, observe the pressure change;
If it is a normally closed pump, ZME current adjusted to the minimum then sratr motor;
Nanyang NanTai Experimental Equipment Co.,Ltd is a joint-stock enterprise that produces common rail test bench, traditional dieselfuel injection pump test bench, Nozzle Tester, and sells spares parts for repairing variety of electronic diesel injection systems
to serve the automobile aftermarket all over the world.
The company pursues high standard manufacturing and qualified products. All the products have passed the quality system
certification of ISO9001:2008 & CE certificate and entered European market. Depending on the stable and lasting capabilities, our
products are well known to international market such as Russia, Mongolia, Bulgaria ,Albania, Argentina, South Africa, Germany,
Romania, Ukraine, Haiti, Iraq, Britain, Brazil, Malaysia and etc
Q: Are you trading company or manufacturer ?
A: We are test bench assembling factory. We have had test bench for 20 years.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Q: How about the use of maintenance technology and equipment ?
A:We have free training about test bench,injector and pump maintenance.
Q: Why should I choose your product?
A: We can provide you the best quality and the most competitive price ,and we have our own engineer, if you have any requirements
you can contact us directly.
Send Message
