Professional Coil Spring Compressor/Clamp, Spring Compressor Hand Operate, Strut Spring Compressor

• Drop forged jaws & lead screws screws 350mm/14 inch both heat treated to ensure professional performance.
• Use Externally to Compress MacPherson Strut Coil Springs
• Permits Quick and Safe Removal or Installation of Springs
• Zinc Plated Compressor Fit Most Macpherson Strut Sizes
• Drop Forged, Heat Treated Steel

Strut Coil Spring Shock Compressor make you complete the suspension work for your vehicle that involves removing coil springs, you will need a strut compressor.It's important that you go for a heavy duty strut spring compressor due to the amount of strain the spring is under.

How to use

1>Affix one leg of tool. Hooks on both ends of leg should engage coil spring

2>Be sure that movable hex nuts are threaded onto bolt and seated in hex holes of double hook. Hand tighten bolt.

3>Affix second leg of tool on opposite side of coil spring in same manner as done for first leg. Hand tighten bolt.

4>Apply safety hooks to spring with flange and wing nuts. Assemble to each leg and coil spring. Wing nuts should be finger tight

5>Compress coil spring using hand tool or impact gun with 15/16" socket. Turn each bolt alternately so that compression of spring is equal on each side.

6>Compress until the ends of the spring are completely free of the spring seats at each end of the coil. Total compression required isusually not more than 3"

7>Remove upper bearing dust cap on MacPherson strut to expose piston rod nut.

8>Remove piston rod nut, upper bearing plate and upper coil spring seat.

9>Remove coil spring in compressed condition and set aside. Shock absorber is now exposed to be fixed or replaced

10>Reassemble all components in reverse order. Be sure coil spring seats are reassembled so that they match ends of coil spring.

11>Loosen each leg evenly and allow the ends of coil spring to contact the seat properly. Remove each leg.

12>Repaired MacPherson Strut is now ready to be reinstalled on vehicle.

Other Products:

YAQIYA factory annual output increased till to 8000 tons for Fe adhesive wheel weights by automatic equipment.

Cangzhou Yaqiya Auto Parts Manufacturer Co., Ltd. specializes in manufacturing and exporting several of wheel balance weights, tire valve, tire repair tools, tire repair seal and tire repair patch. Our company has developed very fast. The enterprise management, employee quality, technical equipment, production technology and supporting facilities, etc. all have achieved international standards, so that our company takes the leading position in the same field in the country.

We have participated in exhibitions many times, such as Italy, Dubai and other exhibitions
We have become one of the most trusted supplier and cooperation partners of many 
famous brands at home and abroad, like Tiptop, Tiptopol, Wurth, Forch...

1. who are we?
We are based in Hebei, China, start from 2014,sell to Western Europe(30.00%),Domestic Market(20.00%),North America(15.00%),Southern Europe(10.00%),Northern Europe(5.00%),Mid East(5.00%),Eastern Europe(5.00%),Africa(3.00%),South America(2.00%),Southeast Asia(2.00%),Eastern Asia(2.00%),South Asia(1.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
wheel balance weights,tire plug,tire valve,tire patch,tire repair tools

4. why should you buy from us not from other suppliers?
Adhesive wheel weights with best Chinese blue tape and highly corrosion resistance Clip on wheel weights with good steel hook and 100% fit for rims 24 hours in service ,fast reply to each customer

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Italian