| MAINPARAMETER | C9350C | C9372 | C9370C | |
| RANGE 0F PROCESSING | BRAKE DRUM DIA | 152-450MM | 152-500MM | 152-711MM |
| DEPTH MM | 160 | 165 | 220 | |
| BRAKE DISC | 180-370MM | 152-500MM | 178-457 | |
| Rotating Speed of Workpiece | 70//88/118 R/MIN | 70-320 R/MIN | 70//88/118 R/MIN | |
| Motor Power | 0.75KW | 0.75KW | 0.75KW | |
1. "Replacement adapter" system eliminates the need for traditional bell clips and cones.
2. Continuously variable spindle and cross feed speed set for fast rough and fine finishing.
3. Precision double cutter and fast drum to rotor conversion help improve your service capability.
4. Dc motor designed to meet the requirements of industrial motion control.
5.Positive rake cutter tip angle provides for a one pass finish virtually every time,allowing you to complete your work fast.
Maintenance of brake drum disc cutting machine:
1) before using equipment should be wiped clean, and give each injection point and rotation surface injecting grease.
(2) before the equipment run, should check the engine oil transmission oil level at work. According to equipment use frequency, the oil should be replaced about half a year.
(3) head, shaft sleeve, etc to loading and unloading, often should strictly avoid knock against. If there are bumps, available to fix the light sand bar.
(4) after using for a long time, the spindle copper set of fitting clearance of radial and axial clearance of vertical screw will increase due to abrasion, clearance is too large will affect machining precision for the equipment, and therefore should be adjusted as appropriate.
Send Message
