PDR Dent Repair Kit Dent Lifter Car Dent Removal Puller Tab Hail Lifter
Item No.:BT211007
Features:
1. Aluminum body
2. Stainless Steel Adjustment knob
3. Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips
4. One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5. On the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be teared down.
Note:
During operation , you need to adjust your force gradually until the position where the dent is located is pulled to the flat and recovered entirely.
Operation and Use of Article:
1.Use hot glue gun, put glue on the glue tab
2.Then place the recess in the dent glue tab.
3.Use the dent mini lifter extraction of the bump.what tool you use, also
depends on the size of the dent, up to 30mm diameter is the dent mini lifter.
4.When the temperature reaches the right time, do not be too hard. Then pull until the glue tab is removed.
5.Use the release agent , dissolve glue.
6.Use of the scraper, remove the glue
7.Use a soft clean cloth wipe again residual glue, make the body to restore new look
Packing list:
1pc adjustable dent lifter
| Color | Weight | Material | Package Inner Box/cm | Gross weight/set KGS |
| Red/blue/yellow/black | 0.529 | Aluminum | PP BAG+inner box 20.5*15*9 | 0.62 |
Tips:Dent lifter colors can be customized,eg:Red/blue/yellow/black,etc..
Tips:We can provide the sample for free but the freight shall be borne by yourself or freight collect.
Send Message
