Model NO.
JS-DX001
CE
Certificate
Size
160X75X28mm
Weight
430g
Full Charging Time
4 Hours
Peak Current
400A
Starting Current
200A
Transport Package
Color Box
Specification
CE
Trademark
CONGSIN
Origin
Guangzhou, China
Production Capacity
10000/PCS
Warranty:
2Year
Certification:
CE
Battery Type:
Lithium-ion
Output Voltage:
12V
Type:
Jump Starter
Capacticy:
16000mAh
Car accessories tire Inflator with 16800mah Jump starter (JS-DX001)
1.Use for car jump starter
2.Use for Power bank for laptop battery,
with 8 pcs laptop adatper plugs for different laptop
3.Used for power bank for Moblie/MP4 /DV
camera; all devices with usb output,with four in one mobile phone adapter
4.With LED light, SOS function
5.With Car Charger
6.With Car Tire Inflation,with 3 gas needle for car,motor& bicycle
7.High capacity with long cycle life:
Parts List:
#Parts NameQuantity
1Main Product*1
2Notebook switch cable*1
3 1-3 Mobile phone connector*1
5 Notebook connector*8
6 Home Charger*1
7 Car charger*1
8Jump cable battery clamps1
Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash
5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Special note:
To jump start 12V vehicle, please make sure at least three LED lights of EPOWER are bright firstly, then connect the Red battery clamp to the battery Positive (+) and Black clamp to the battery Negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the vehicle is started, please disconnect the plug and remove the battery clamps within 30s.
Product Highlights:
The smallest and lightest jump starter with patented technology in the current market.
Use high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
Support 12V vehicle for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4 Pocket PC PDA, notebook as well as other products charge / power supply;
For more info you need, please contact us anytime!
1.Use for car jump starter
2.Use for Power bank for laptop battery,
with 8 pcs laptop adatper plugs for different laptop
3.Used for power bank for Moblie/MP4 /DV
camera; all devices with usb output,with four in one mobile phone adapter
4.With LED light, SOS function
5.With Car Charger
6.With Car Tire Inflation,with 3 gas needle for car,motor& bicycle
7.High capacity with long cycle life:
Parts List:
#Parts NameQuantity
1Main Product*1
2Notebook switch cable*1
3 1-3 Mobile phone connector*1
5 Notebook connector*8
6 Home Charger*1
7 Car charger*1
8Jump cable battery clamps1
Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash
5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Special note:
To jump start 12V vehicle, please make sure at least three LED lights of EPOWER are bright firstly, then connect the Red battery clamp to the battery Positive (+) and Black clamp to the battery Negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the vehicle is started, please disconnect the plug and remove the battery clamps within 30s.
Product Highlights:
The smallest and lightest jump starter with patented technology in the current market.
Use high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
Support 12V vehicle for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4 Pocket PC PDA, notebook as well as other products charge / power supply;
1 | Type Number | JS-DX001 |
2 | Intput | DC 12V/1A ( USB micro) |
3 | Output | DC 5V 2A and 19V 2A |
4 | Store Capacity | 16800mAh(Full) |
5 | Start current | 200A |
6 | Peak current | 400A |
7 | Working Temp | -20°C-60°C |
8 | Accessories | 1.8 plugs for Laptop adapter 2.Car charger 3.Storage battery wire clip 4.Four-in one mobile phone adapter( for andriod,apple) 5.Power adapter 6.Car Tire Inflation,3 gas needle |
10 | Use for | Car jump starter;power bank for laptop,mobile, ipad;sos;led light; Car Tire Inflation |
For more info you need, please contact us anytime!
Send Message