*To check the quality of brake fluid quality
*3 LEDs to indicate percentage of water in the brake fluid
*Automatically power off
*IP44 Water & Dust proof
*Operated by a LR03 AAA 1.5V battery
The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality it tested and indicated on three LEDs in terms of per cent of water in the brake fluid. And our MT310 brake fluid tester is waterproof.
Ready for Brake Fluid Test
*Sliding out the board and install battery on the board, and then press the cap of the brake fluid tester for open.
*Dip the test probes into the brake fluid up to 10mm depth at least.
*Battery: one 1.5V AAA battery.
To Check Fluid Quality
Press the button on the cap for power on, green LED will light up.
Insert the tester into reservoir for one second then the test result will be correctly indicated by LEDs.
The tester will automatically power off after 10 seconds of inactivity.
Product Labelling Indication
Geen: Battery OK, i.e: no water contained in the brake fluid.
Yellow: Less than 3% of water content in brake fluid, the brake fluid should be changed within 6 months.
Red: At least 3% of water content in brake fluid. The brake fluid must be changed urgently!
