Model NO.
VF5500
Condition
New
Bluetooth
Not Support Bluetooth
Product Name
Auto Body Frame Rack
Platform Length
5600mm
Platform Width
2200mm
Platform Height
120mm~320mm~1200mm
Post Max. Tension
95kn
Pneumatic Pressure Range
0.8MPa
Post Working Range
360 Full Around
Cylinder Capacity
10t
Maximum Lift Capacity
4000kgs
Function
Vehicle Body Repair and Straightening
Market
Garage,Auto Body Shops,Collision Center
Usage
Automotive Collision Repair Equipment
Voltage
3pH/380V/415V/220V
Package
Wooden Box
Lifting
Tilt and Full Lift
Transport Package
Seaworthy Wooden Boxes
Specification
4CBM
Trademark
Vico
Origin
China
HS Code
8479819000
Production Capacity
100 Sets/Year
After-sales Service:
5 Years
Warranty:
3 Years
Type:
Flatbed-type
Max. Lifting Capacity:
4T
Certification:
CE
Standard:
Standard
Vico auto body frame machine Frame rack VF5500 Chassis liner Hydraulic lifting bench
Features
(1) Manganese plate entirety lifting platform, high strength reinforcement plate, lifting smoothly and operating safely.
(2) Four outputs oil system makes lifting, unlocking, dropping and locking possible through a key. Full automation, technological innovation, humanized design, practical working philosophy. Remote control: A key in hand, manipulate freely.
(3) Double cylinder self-locking hydraulic parallel lifting platform, with tilt lifting function, convenient for car to drive on and off. The height is adjustable among 120mm-320mm-1200mm according to the repairing need. The lifting device with double safety of hydraulic and mechanical self-locking, more secure.
(4) Double-cylinder hydraulic vertical lifting platform makes the accidental vehicle loaded and unloaded more convenient. Lifting frame has double security of hydraulic and mechanism. The lifting range is 120mm-320mm-1200mm in which can be adjusted.
(5) Two pulling towers can be rotated 360 degrees along the platform which is operated more convenient. Unique wheel rotation design, so that the pulling towers move more stable, flexible.
(6) Universal clamps are forged and heat-treated, high strength and long life, fix the auto quickly and accurately, also the extension height and angle can be adjustable.
(7) Hydraulic system with good design has powerful driving force, long life and low failure rate.
(8) Control box's four oil lines are connected with oil cylinder of the basement and two oil lines of the platform respectively, it makes the two pulling towers pull and hydraulic lock separately, no influence each other, instead of the traditional tower bolt locking. A gas pipe is connected with the air cylinder of the safety lock teeth, ensuring the security of the platform up and down operation.
(1) Manganese plate entirety lifting platform, high strength reinforcement plate, lifting smoothly and operating safely.
(2) Four outputs oil system makes lifting, unlocking, dropping and locking possible through a key. Full automation, technological innovation, humanized design, practical working philosophy. Remote control: A key in hand, manipulate freely.
(3) Double cylinder self-locking hydraulic parallel lifting platform, with tilt lifting function, convenient for car to drive on and off. The height is adjustable among 120mm-320mm-1200mm according to the repairing need. The lifting device with double safety of hydraulic and mechanical self-locking, more secure.
(4) Double-cylinder hydraulic vertical lifting platform makes the accidental vehicle loaded and unloaded more convenient. Lifting frame has double security of hydraulic and mechanism. The lifting range is 120mm-320mm-1200mm in which can be adjusted.
(5) Two pulling towers can be rotated 360 degrees along the platform which is operated more convenient. Unique wheel rotation design, so that the pulling towers move more stable, flexible.
(6) Universal clamps are forged and heat-treated, high strength and long life, fix the auto quickly and accurately, also the extension height and angle can be adjustable.
(7) Hydraulic system with good design has powerful driving force, long life and low failure rate.
(8) Control box's four oil lines are connected with oil cylinder of the basement and two oil lines of the platform respectively, it makes the two pulling towers pull and hydraulic lock separately, no influence each other, instead of the traditional tower bolt locking. A gas pipe is connected with the air cylinder of the safety lock teeth, ensuring the security of the platform up and down operation.
| Platform Length | 5600mm |
| Platform width | 2200mm |
| Platform height | 120mm~320mm~1200mm |
| Post Max. tension | 98KN |
| Pneumatic pressure range | 0.8Mpa |
| Post working range | 360° full around |
| Cylinder capacity | 10T |
| Maximum lift capacity | 4000kgs |
| Voltage | 3Ph/380v/415v/220v |
| Weight | 2900kgs |
| Packing size | 5600*2130*350mm+750*750*1000 2150*1360*750mm/6cbm |
Send Message
