Model NO.
P80-2035-B
Length
1m~6.5m
Marine Parts
Pneumatic Rubber Fender
Usage
Protection, Ship Docking
Certification
BV, ISO9001, CCS
Transport Package
in Nude Loaded in Container
Specification
CCS, ABS, LR, ISO17357: 2002
Trademark
Evergreen Maritime
Origin
China, Qingdao
HS Code
40169500
Production Capacity
56 Units Per Week
After-sales Service:
Support
Warranty:
Support
Material:
Rubber
Initial Presssure:
50kpa, 80kpa
Fender Type:
Yokohama Type
Diameter:
0.5m~3.3m
Yokohama PneumaticRubber Fender Requirements
1. Construction features
Yokohama pneumatic rubber fender shall consist of an out rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
The out rubber are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
The inner rubber layer seals the pressurized air inside the fender
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
2. Pressure requirements
Evergreen-Maritime manufactures yokohama pneumatic rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357: 2014.
1. Construction features
Yokohama pneumatic rubber fender shall consist of an out rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
The out rubber are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
The inner rubber layer seals the pressurized air inside the fender
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
2. Pressure requirements
Evergreen-Maritime manufactures yokohama pneumatic rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357: 2014.
Send Message
