Grating Manhole Cover Grid Units with Hot-Dipped Galvanized Finishing for Building Material CE Approved, Manhole Cover, Trench Cover

Product Description

EN 1433 is a European standard that specifies the requirements for linear drainage channels that are installed for the discharge of surface water from pedestrian and/or vehicular traffic areas. The standard defines requirements and guidelines, including load classes, design and test requirements, for designation and quality control. In EN 1433 "Drainage channels for vehicular and pedestrian areas", the drainage channels are sub-divided into the classes A 15 to F 900. The classes correspond to different test forces and installation locations (see load classes):

A 15 = 15 kN test force
B 125 = 125 kN test force
C 250 = 250 kN test force
D 400 = 400 kN test force
E 600 = 600 kN test force
F 900 = 900 kN test force




A grating is the loadbearing element that closes a drainage channel at the top. Usually, the component is made of ductile iron, galvanised steel, stainless steel or composite material. Integrated inlet openings of various designs allow surface water to drain into the channel. Gratings protect the channel from debris such as leaves, sand and stones. In addition, it protects pedestrians and vehicles against injury and damage when crossing the channel..





Welded Heavy Duty Steel Bar Grating is commonly used for floor trenches and sump covers exposed to heavy equipment traffic. It is used extensively through out mining, power generation, highways, airfields, and on truck terminal loading docks and ramps. It is suitable for large single span conditions or where grating must be support extreme









 

Note: the max size of bearing bar 150 mm * 8 mm ( profile: height * thickness) is available.


Packing & Shipping

Bundled with steel belt, for bulk shipping or container.






Company Information

Ningbo Jiulong Machinery Manufacturing Co., Ltd (NJMM)

Jiulong Machinery is recognized as a leader in the field of steel grating manufacturing. Since its inception in 1992, it served conventional energy sectors by providing innovatively intelligent machineries to upgrade thermal power stations. In 2002-2003, with an insight into prospective steel industry, Jiulong Machinery completed construction of the steel grating manufacturing center, which was the first auto electroforged welding steel grating production line in mainland China. Since then, Jiulong Machinery became the biggest exporter of this product line. Jiulong Machinery reached a peak in 2009, an export volume of 24,500 metric tons of which more than half were exported to the USA.

Over the past decades, Jiulong Machinery has always remaining in position as the number 1 manufacturer & exporter by continuously investing in technological innovation and strengthening operation management. The company now operates 7 electroforged welding production lines, with a substantial annual production capacity of 100,000 tons. Under the well-established total quality management system(ISO 9001-2000 accredited since 2001), each piece comes from Jiulong Machinery is made to exact specification and carefully checked before dispatching.

As so far, we've established marketing network in 35 countries worldwide. To enlarge market share, establishing business relations with more and more customers is one of our all-important goals. Please reach out if you have any inquiry or pending order in hand. Also, if you have any EPC for steel structure with application in oil rig platform, shipyard, bridgework, power plant, petrochemicals, iron &steel works, sewage treatment plant, etc, we can offer you graphic design and practical & economy solution.

Contact: Mr. Andrew Young