Model NO.
FPP
The Vehicle Inlet and Outlet
Up
Design
Four Post
Certification
CE, ISO, CCC
Lift Mode
Hydraulic Cylinder
Voltage
110V 220V 380V 440V
Load Capacity
1-5ton
Lifting Height
1-10m
Color
Blue, Grey, Red...Customized
Lifting Method
Hydraulic
Lifting Speed
4-6m/Min
Material
High Strength Steel
Frequency
50Hz/60Hz
Guardrail Height
1.1m
Surface Treatment
Painting
Safety Precaution 1
Anti Explosion Valve
Safety Precaution 2
Emergency Stop
Safety Precaution 3
Dual Chain System
Certifications
CE ISO9001
Control
Control Box + Control Panel
Transport Package
Plastic Film
Specification
CE, ISO, SGS
Trademark
PLK LIFT
Origin
China
HS Code
8428909090
Production Capacity
500 Sets/Month
After-sales Service:
Online Service, Free Express Accessories.
Warranty:
12 Months
Type:
Parking Lift
Working Mode:
Car Ride
Driving:
Hydraulic
Falling Prevention Device:
Pneumatic Insurance
4 Post Car Service Lift For Repair
Date Sheet:
| Model No. | FPP3618 |
| Car Parking Height | 1800mm (It's enough for parking family cars.2000/2100mm is optional for big SUV) |
| Loading Capacity | 3600kg (It's enough for parking family cars.3200/3600kg is optional) |
| Drive Through | 1896mm (it's enough for parking family cars and SUV) |
| Usages | Suitable for parking and repairing cars and double space for storage |
| Motor Capacity/Power | 3KW,Voltage is customized as per customer local standard |
| Cylinder | Italy Aston seal ring, double high pressure resin tubing, 100% no oil leakage |
| Rated Oil Pressure | 18mpa |
| Test | 125% dynamic load test and 175% static load test |
| Control Mode | Mechanical unlock by keep pushing the handle during the descent period |
| Other Control Mode | Electromagnetic unlock and remote control are optional (price as follows) |
| Standard configurations | 3pcs plastic tray to prevent the oil drip from upper car while parking 1pc metal tray to load a jack for car maintenance use |
| Car Parking Quantity | 2pcs*n |
| Loading Qty 20'/40' | 12pcs/24pcs |
| Weight | 860kg |
| Product Size | 4920*2664*2128mm |
| Packing Size | 4370*705*490mm |
Advantage:
1.The lifting platform adopts a through-type design, so that the car can smoothly enter and exit without reversing in and out.
2.The loading platform is made of rectangular tube and channel steel. The table is paved with a tread plate. The sides of the platform are provided
with a high 700 fence welded with square tubes.
3.The lifting adopts high-quality chain and double-chain lifting insurance. The chain model LH1266 has a safety factor greater than 7 times, safe
and reliable, and meets the requirements of GB/T8918-188.
4.The hydraulic system uses high-quality domestic oil pump and control components to ensure the service life and stability of the hydraulic station.
5.The electrical parts are made of domestic Zhengtai electrical components, and electrical control boxes are provided on each floor.
6.The lift has a special pneumatic safety device, which can safely lock at any working point, and it is convenient to get on and off without shaking.
7.The lift has a top dead center travel limit device that automatically stops when it reaches the maximum height.
8.The elevator rises and falls, the operation is synchronized, the speed is stable, and there is no abnormal noise and vibration creep.
9.The lift controller is equipped with an electrical control component with overload and phase failure, and the insulation resistance is less than 5
megohms.
10.Set operation buttons on each floor and lifting platform to achieve multi-point control.
11.An alarm bell is provided before the equipment is running to remind people around the lift.
12. The appearance of the equipment is smooth and flat, and the paint surface is strong and beautiful.
All our products are CE certificated, good quality and competitive price. Welcome to send the inquiry to us if you are interested in any of them, and we will reply you ASAP.
Contact Information:
Send Message
