260g Aluminum Road Stud with 3*7 Glass Reflector (TR601), Aluminum Road Stud, Raised Pavement Marker

Aluminum, plastic, glass, solar energy, LED road studs provided, Various designs according to your special requirements.

1. Item No and name: TR601, alimunum road stud filled with glass reflector.

2. Dimensions: 100*100*20mm, length anchoring shanking: 65mm;

3. Materials: Aluminum and glass reflective materials;

4. Others: The body and reflector color can be decided by clients.

:
Installation steps:


1, positioning: first use a ruler to determine the installation position, guarantee the vertical position on a straight line, the installation distance with the design requirements, installation area should level off, dry, clean, no crack.


2, mix the glue: spike special glue, spike special B glue, glue B glue ratio is 1:1 (glue 1 kg, such as: A, B glue is 1 kg).

,.
Glue must mix, colour and lustre is consistent.

3, glue: install the road to clean, use glue wants moderate, both cements spike underside, and don't spill too much, about each spike need 40-50 g glue, the glue in sign the bottom, on the row a good location in advance.

.
To clean the road debris after installation.


5, patrol: two hours should be installed spike check it again.


6, a road: it is recommended that a road six hours, to ensure that the glue cure time.