MT508sst42800
24 Hours on Line
12months After Delivery
ISO9000, CCC
Euro 3
5ton 7ton 8ton 3ton
Manual
Diesel
12000L
4x2
120HP 170HP 190HP 160HP
New
12cbm Sewage Suction Tank Truck with Water Tank
95HP 120HP 170HP 160HP 190HP
5 Gears Frowards and 1 Reverse.
10.00r20 with One Spare Tyre
99km/H
PLC Automatic Operation, with Manual Operation
Within 40 Days
1 Year
MANTEN
Roro, Bulk Vessel or Frame Container
Dongfeng sewage tank truck with cleaning tank
China
8704223000
Product Description
HUEBEI MANTEN AUTOMOBILE CO.,LTD
I. Details of Dongfeng 4X2 6 wheelers 8000liters 8cbm septic suction tank truck with vacuum pump
(1) Functions:
The cleaning and sewage suction truck is also called multi-functional combined sewage suction truck. It is a combined operation truck integrating multiple functions such as dredging, flushing, sewage suction, mud water separation, sewage reverse discharge, sewage recycling and reuse. It adopts European advanced technology and has been optimized and upgraded to adapt to the complex domestic pipe network and working environment. It is the most advanced sewer dredging vehicle in China. The vehicle has rich power reserves. Combined with the optional multi-level sewage water circulation system, the functions of high-pressure flushing, vacuum sewage suction and sewage circulation system work at the same time to realize uninterrupted continuous operation. All tanks, pipes, valves and connectors of the vehicle are made of stainless steel with good anti-corrosion performance, so that the equipment will not be rusted in use and prolong the service life.
The operation system could be manual or electrical control.
| Cleaning part of the cleaning suction truck: the cleaning tank is made of 4mm WISCO carbon steel, with a volume of about 2m3, with visual water pipe, installed with Tianjin Tongjie high-pressure cleaning pump, pressure 21MPa, flow 135L / min, with 60m inner diameter 19mm cleaning steel wire hose, standard equipped with ten alloy nozzles with different diameters, pipe rolling force of 1800n, pipe rolling speed of 0-25m / min, and propulsion force of more than 180n, It can connect water pipes and sewer pipes with a diameter of 10-80cm. Cleaning the sewage suction part of the sewage suction truck: the sewage suction tank is made of 6mm WISCO carbon steel, with a volume of about 4 square meters, with a sewage viewing window, a hand washing device, an anti overflow valve, Sk-6 water ring vacuum pump (optional oil pump), an 8m 4-inch sewage suction steel wire rubber pipe, a 100mm sewage ball valve is equipped at the end of the tank, the tank body is equipped with a liquid pressure lifting system, the back cover is opened and closed hydraulically, and has a self unloading function, which can be pressurized and forced drainage. The tank body is equipped with a spacer plate to prevent the deformation of the dirt absorption tank body. Optional parts of cleaning and sewage suction truck: Interworking of clean water tank and sewage suction tank, anti overflow alarm device, solid-liquid separator, anti-corrosion in tank and watering function. |
II. Technical data of water tank truck
| Specification sewage suction truck | ||
| Drive model | 4*2,RHD | |
| Max. Driving Speed(km/h) | 100 | |
| Cabin | Passengers Allowed in front row | 3 persons |
Vehicle | Curb Weight(kg)7 | 250 |
| Overall Dimensions(L x W x H)(mm) | 7000*2500*3280 | |
| Approach/Departure angle(°) | 19/16 | |
| Wheel Base(mm) | 3800 | |
| Overhang (front/rear) (mm) | 1430/1410 | |
| Wheel Track (front/rear) (mm) | 1960/1860 | |
| Axle charge(front/rear)(ton) | 3.6/10.5 | |
| Leaf Spring | 9/12+9H | |
| Tire | 9.00R20, 6+1spare tire | |
Engine | Model | YC4EB |
| MAX Power(HP) | 120 | |
| Displacement | 4.257L | |
| Maximum output power | 95kW | |
| Intake form | Turbocharged | |
| Fuel | Diesel | |
| Cylinder Number | 4 | |
| Cylinder arrangement | Inline | |
| Engine size | 380kg | |
| Rated Speed(RPM) | 2600 | |
| MAX Torque(N.M) | 600N.m | |
| MAX Torque Speed(RPM) | 1200-1600 | |
| Minimum fuel consumption at full load | 200g/kW.h | |
| Cylinder x stroke | 110*112mm | |
| Emission standard | Euro 3 | |
Gearbox | Model | DC6J65TC |
| Gear | 6 forwards & 1 reverse |
Sewage Suction System | ||
Sewage Tanker | Capacity | 8 cubic meters |
| Material | Q235 high tension steel, 5mm Tank body and 6mm End Plate | |
Dumping System | Middle Tipper | Hydraulic Controlled Middle lifting. |
| Rear Door | Hydraulic Controlled Rear Door | |
| Pump | High Efficiency Vacuum Suction Pump 10ton,XD-360 | |
| Pump System | 100mmΦ suction pipe, suction time ≤5min, effective suction range≥8,max vacuum degree ≤15 Kpa, dump angle ≥45 | |
| Vacuum Pressure | -0.09Mpa | |
| Sewage Pipe | 7 meters Rubber Pipe(one unit pipe) | |
| Other Parts | Water-gas separator, Oil-gas separator, Four way valve, Safety valve, Anti overflow valve, Anti overflow warning device | |
(1) More than 12 years professional manufacturer experience.
(2) CCC ISO9001 agreement
(3) Be designed according to your requirements
(4) Small order can be accepted
(5) We accept 100% inspection, welcome to our factory at any time
(6) 12 month quality guarantee term
We can offer 4x2, 6x4, 8x4, Dongfeng, Sinotruck, FOTON, SHACAN, FAW, CAMC, ISUZU, JMC, JAC with 3m3 to 20m3 water tank trucks.
III. Details and operation of Dongfeng 4X2 6 wheelers 8000liters 8cbm septic suction tank truck with vacuum pump
Features of cleaning and suction vehicle function:
1. Powerful function: it has many functions, such as dredging, dirt suction, dirt cleaning and so on
2. Sandwich power take-off: with full power output and low noise, it takes power from chassis engine and transmits it to vacuum pump and high-pressure water pump respectively. Realize multi-point high-power power power extraction, and the power loss is small.
3. Vacuum pump: limit vacuum degree: 33mbar, maximum pumping capacity: 1400m3 / h. Maximum working speed: 1300r / min. Water ring vacuum pump, Siemens technology, domestic production.
4. High pressure water pump: rated pressure: 24MPa, rated flow: 212l / min, maximum speed; 1450r/min. High pressure plunger pump, Sino German joint venture.
5. The length of the braided PVC hose can be rotated from + 1.3m to + 1.3m, and the length of the braided PVC hose can be rotated vertically. Three 1.8m extension pipes are used for the extension of sewage suction pipe.
1. Powerful function: it has many functions, such as dredging, dirt suction, dirt cleaning and so on
2. Sandwich power take-off: with full power output and low noise, it takes power from chassis engine and transmits it to vacuum pump and high-pressure water pump respectively. Realize multi-point high-power power power extraction, and the power loss is small.
3. Vacuum pump: limit vacuum degree: 33mbar, maximum pumping capacity: 1400m3 / h. Maximum working speed: 1300r / min. Water ring vacuum pump, Siemens technology, domestic production.
4. High pressure water pump: rated pressure: 24MPa, rated flow: 212l / min, maximum speed; 1450r/min. High pressure plunger pump, Sino German joint venture.
5. The length of the braided PVC hose can be rotated from + 1.3m to + 1.3m, and the length of the braided PVC hose can be rotated vertically. Three 1.8m extension pipes are used for the extension of sewage suction pipe.
6. Choose from a variety of nozzles:
A. Spray the triangular nozzle backward at the same time. Suitable for completely blocked pipes.
B. Mushroom shaped nozzle: the nozzle is arranged at two angles and has large thrust. It is used for pipelines with grease.
C. Bomb nozzle: the nozzle forms an included angle of 15 ° or 30 ° with the nozzle axis, which is usually used.
7. Water pipe reel: hydraulic drive, forward and reverse rotation, stepless speed regulation. It is installed at the rear of the sewage tank and can be wound with a special rubber hose for storing DN25 for no less than 600m.
8. Special hose: the original imported nd25 special hose for sewer dredging has the advantages of high pressure resistance, light weight, low friction resistance and strong scratch resistance. Standard configuration pipe length: 20m.
9. Cleaning water pipe reel: the water pipe is pulled out manually and retracted automatically. The original imported hand-held spray gun. It is used to clean the vehicle and operation site. The hose length is 15m.
10. Self absorption and self discharge: the back cover can be opened and self discharge the impurities in the tank, with long service life, fast working speed and convenient transportation.
A. Spray the triangular nozzle backward at the same time. Suitable for completely blocked pipes.
B. Mushroom shaped nozzle: the nozzle is arranged at two angles and has large thrust. It is used for pipelines with grease.
C. Bomb nozzle: the nozzle forms an included angle of 15 ° or 30 ° with the nozzle axis, which is usually used.
7. Water pipe reel: hydraulic drive, forward and reverse rotation, stepless speed regulation. It is installed at the rear of the sewage tank and can be wound with a special rubber hose for storing DN25 for no less than 600m.
8. Special hose: the original imported nd25 special hose for sewer dredging has the advantages of high pressure resistance, light weight, low friction resistance and strong scratch resistance. Standard configuration pipe length: 20m.
9. Cleaning water pipe reel: the water pipe is pulled out manually and retracted automatically. The original imported hand-held spray gun. It is used to clean the vehicle and operation site. The hose length is 15m.
10. Self absorption and self discharge: the back cover can be opened and self discharge the impurities in the tank, with long service life, fast working speed and convenient transportation.
| Applicable occasions and working principle of cleaning and suction vehicle: The cleaning and sewage suction vehicle integrates the functions of flushing, dredging, sewage suction and reverse discharge. The sewage suction part is used for the suction, transportation and discharge of various liquid and semi liquid (such as sludge in septic tank, sewer, rainwater well, inspection well, sedimentation well and about 10mm stones), as well as sludge, feces, wastewater and other media under various ditches, It can also be used for emergency treatment of sudden environmental pollution accidents. It can also be used for the sewage absorption of septic tanks and sewers in communities, projects, schools, farms and other places, or for the cleaning and transportation of site mud, the transportation of crude oil in refineries and so on. The high-pressure cleaning part of the cleaning suction truck is mainly used to dredge the sewer, sewage pipeline and dead corner mud ditch. It can also be used to clean the industrial drainage pipeline and wall, and clean the road and square ground. Its working principle is that the water sprayed by the high-pressure nozzle (super pressure and high flow) forms a reaction force in the sewer, Push the high-pressure nozzle forward to break, Jack and clean the blockage in the pipeline, so as to achieve the role of dredging. The design structure of the whole vehicle is reasonable, the performance is excellent, and the operation is flexible and simple. |
IV. Production workshop
There are more than 500 workers in our factory. Every production details are strictly controlled by our technicial engineers and production manager.
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
VI. COMPANY INFO
HUBEI MANTEN AUTOMOBILE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales
and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck ,
refrigerated truck and etc. Main info as below:
Welcome to contact with us for more info. We will offer you the best truck as we can .
Sales manager : Ms Scarlett
