DOT Warning Triangle Roadside Emergency Triangle Kit for Vehicles (3-Pack), DOT Warning Triangle, Reflective DOT Warning Triangle

Always be prepared... maintain safety, alertness and caution on the road with this set of reflective emergency triangles. These bright visible markers quickly alert other drivers and first responders of a vehicle stopped in the road.

Get all eyes on you when it matters most. These plastic triangles are designed with a vivid fluorescent orange color for maximum daytime visibility and red acrylic reflectors that provide illumination from headlights in the dark.

Durably constructed with a heavy duty non-skid base that can resist up to 40 mph winds without blowing over. Rubber foot pads and snap pin slots hold each triangle in place until the emergency is cleared. 17 inch height and over 3 lbs. weight.

Because one just isn't enough. Place one in front, one behind and one to the side of stopped vehicles. Create an effective portable emergency kit for every vehicle you own. The triangles fold and come with a convenient travel case.

These roadside reflective emergency triangles are US Department of Transportation (DOT) compliant and designed to meet or exceed all DOT FMVSS 571.125 standards. For first responders, road crews, traffic direction and personal use.
 

Before using warning signs,you must first open the hazard lights,and put warning triangle behind the vehicle on the back of the car with 30 to 100 meters

To extend product life,when warning signs are not used,please fold the reflector and supporting put them inside the plastic protective case

Products in the transportation and stprage,need be taken care that avoiding the falling

Opening steps

1.  The warning triangle will be removed from the plastic case ,face to face their own reflection,press as the arrow shown in Figure1,      the left and right mirror are slowly of patchwork opened,refer to the next state in Figure 2

2. The right hand holding a mirror.left mirror left hand slowiy downward pressure,as shown in Figure 3 the arrow has been pressed in the end the following figure 4

3. Open the bracket,as shown in Figure 4 the arrow to open slowly to stand 90 degrees,as Figure 5 bucket state at this time warning triangle has been completely opened,you can use a horizontal surface

Folding steps

1. Facing to the warning triangle

2. Picking up the bracket,as shown in Figure 1 ,slowly away to the next bracket as Fifure

3. With the left hand holding the left mirror,with the mirror slowly being forced to the right down with the pressure(as shown in Figure 3),has been pressure in the end,as Figure 4 status,and then slowly pressing down the left reflector,as figure 5

4. Put the warning triangle inside of the case for next time using.

We are professional manufacturer of automotive warning triangle and auto safety kits. The warning triangle explored by our company according to ECE27R European requirements and we also got certificate of E-MARK. Our market is global and we have exported to Italy, UK, Germany, South Africa and so on. 

Our company is operating with the quality ensure system of ISO 9000. It's business objectives are: First-class brand, build first-class enterprise. The company has a complete and scientific quality management team. Company produces a variety of products strict quality control, with strength and quality of products recognized by the industry. 

OEM and ODM is acceptable, welcome you contact us.

Our laboratory has high and low temperature test, salt fog test, reflection coefficient test, pneumatic test room, and independently the performance test of durability, reflection rate, wind resistance and so on.

Q1. What is your terms of packing?
A: Usually, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take around 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. 

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
   2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.