KTS-WB9114115AZZZZ
Thru-Beam Sensor
Switching Type
Normal Wirewound
Combination of Materials
Low Temperature Resistant
IP67
CE
Non-Customized
AIMIQU
Carton
Germany
8481100090
Product Description
New and Original SICK Contrast sensor KTS-WB9114115AZZZZ 1078126
Mechanics/electronics
1) Limit values: DC 12 V (-10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) With light/dark ratio 1:1.
5) 1-point teach-in (color mode): 16 kHz.
6) Signal transit time with resistive load.
7) 1-point teach-in (color mode): 30 µs.
8) 1-point teach-in (color mode): 15 µs.
9) Total current of all Outputs.
Communication interface
| Special applications | Standard | |
| Device type | Standard | |
| Dimensions (W x H x D) | 26 mm x 62 mm x 47.5 mm | |
| Sensing distance | ≤ 13 mm | |
| Sensing distance tolerance | ± 5 mm | |
| Housing design | Middle | |
| Light source | LED, RGB | 1) |
| Wave length | 470 nm, 525 nm, 625 nm | |
| Light emission | Long side of housing | |
| Light spot size | 0.9 mm x 3.8 mm | |
| Light spot direction | Vertical 2) | |
| Receiving filters | None | |
| Teach-in mode | 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode | |
| Output function | Light/dark switching | |
| Delay time | Adjustable | |
| Special features | - | |
| Delivery status | 2-point teach-in | |
| Parameter presettings | None | |
| Setting the key lock | Standard | |
| Supply voltage | 10.8 V DC ... 28.8 V DC 1) | |||
| Ripple | ≤ 5 Vpp | 2) | ||
| Current consumption | < 100 mA 3) | |||
| Switching frequency | 50 kHz 4) 5) | |||
| Response time | 10 µs | 6) 7) | ||
| Jitter | 5 µs | 8) | ||
| Switching output | Push-pull: PNP/NPN | |||
| Switching output (voltage) | Push-pull: PNP/NPN HIGH = UV - 3 V/LOW ≤ 3 V | |||
| Output current Imax. | 100 mA 9) | |||
| Input, teach-in (ET) | Teach: U = 10 V ... < VS | |||
| Input, blanking input (AT) | Blanked: U = 10 V ... < Uv | |||
| Input, fine/coarse (F/C) | Coarse: U = 10 V ... < Uv | |||
| Input, light/dark (L/D) | Light: U = 10 V ... < Uv | |||
| Retention time (ET) | 25 ms, non-volatile memory | |||
| Connection type | Male connector M12, 5-pin | |||
| Protection class | III | |||
| Circuit protection | UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression | |||
| Enclosure rating | IP67 | |||
| Weight | 68 g | |||
| Housing material | Plastic, VISTAL® | |||
| Optics material | Plastic, COP | |||
Mechanics/electronics
| Supply voltage | 10.8 V DC ... 28.8 V DC 1) | |||
| Ripple | ≤ 5 Vpp | 2) | ||
| Current consumption | < 100 mA 3) | |||
| Switching frequency | 50 kHz 4) 5) | |||
| Response time | 10 µs | 6) 7) | ||
| Jitter | 5 µs | 8) | ||
| Switching output | Push-pull: PNP/NPN | |||
| Switching output (voltage) | Push-pull: PNP/NPN HIGH = UV - 3 V/LOW ≤ 3 V | |||
| Output current Imax. | 100 mA 9) | |||
| Input, teach-in (ET) | Teach: U = 10 V ... < VS | |||
| Input, blanking input (AT) | Blanked: U = 10 V ... < Uv | |||
| Input, fine/coarse (F/C) | Coarse: U = 10 V ... < Uv | |||
| Input, light/dark (L/D) | Light: U = 10 V ... < Uv | |||
| Retention time (ET) | 25 ms, non-volatile memory | |||
| Connection type | Male connector M12, 5-pin | |||
| Protection class | III | |||
| Circuit protection | UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression | |||
| Enclosure rating | IP67 | |||
| Weight | 68 g | |||
| Housing material | Plastic, VISTAL® | |||
| Optics material | Plastic, COP | |||
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) With light/dark ratio 1:1.
5) 1-point teach-in (color mode): 16 kHz.
6) Signal transit time with resistive load.
7) 1-point teach-in (color mode): 30 µs.
8) 1-point teach-in (color mode): 15 µs.
9) Total current of all Outputs.
Communication interface
| IO-Link | VendorID DeviceID HEX DeviceID DEC | , IO-Link 26 8000A4 8388772 |
| Process data structure | Bit 0 = switching signal QL1 Bit 1 = empty Bit 2 = Quality of Run Alarm Bit 3 ... 5 = Emission Color Bit 6 … 15 = Measurment Value Emission Color | |
| Digital output | Number | Q1, Q2 2 |
