Introduction:
MT005 gas detector adopting high-quality catalytic gas sensor and SMD arts and crafts, has advantages of good
reproducibility, disturbing-proof against temperature and humidity, long life-span and easy operation, so it is suitable
for gas detection for industrial use. It can transfer the gas concentration in air into digital signal output. It adopts output
of 4-20mA three-line electric current signal, which has advantages of long-distance transmit and good disturb-proof. It is suitable for gas detection in refineries, chemical plant, LPG station, gas boiler, and Spray-Paints etc where gas leakage easily.
Technical Data:
| Sensor type | Catalytic or electrochemical gas sensor |
| Gas sampling | Natural diffusion |
| Power supply | DC24V±25% |
| Power consumption | ≤3W |
| Working method | Continuous monitoring |
| Error rate | ≤±5%F.S. |
| Indication method | 4-digit LED light |
| Condition display | 3 LED lights indicate fault alarm, L-alarm level alarm and H-alarm level |
| Operation | Infrared remote control |
| Response time | ≤30s (LEL) / ≤60s (toxic gas) |
| Working temperature | -40~70 Selsuis degree (LEL) / -20~50 Degree (toxic) Working humidity: <93%RH |
| Explosion-proof | Ex dIICT6 |
| Protection | IP55 |
| Pressure Limit | 86-106kPa |
| Signal output | 4~20mA 2 relay output |
| Install screw thread | G3/4" |
| Cable dimension | ≥1.5mm2×3 |
| Transmit distance | ≤1000m |
| Gas | Range | Resolution | L-alarm | H-alarm |
| LEL | 0-100%LEL | 1%LEL | 20%LEL | 50%LEL |
| LEL Vapor | 0-100%LEL | 1%LEL | 20%LEL | 50%LEL |
| CO | 0-1000PPM | 1PPM | 35PPM | 200PPM |
| H2S | 0-100PPM | 1PPM | 10PPM | 15PPM |
| NH3 | 0-100PPM | 1PPM | 25PPM | 50PPM |
| CL2 | 0-20PPM | 0.1PPM | 5PPM | 10PPM |
| O2 | 0-30%VOL | 0.1%VOL | 19.5%VOL | 23.5%VOL |
| SO2 | 0-500PPM | 1PPM | 10PPM | 50PPM |
| CO2 | 0-6000PPM | 1PPM | 1500PPM | 2000PPM |
1. Why do you choose our company?
We are trading company, we can help our clients to find any kinds of products in China. We are always looking for good manufacturer with good quality and good price for our clients.
2. How can you guanranty your quality?
EVery time we will inspect our factories first. This inspect will include the persons, the present products, their scale etc. If everything is ok, we will start to cooperate. During cooperation, we will go to the factories to test the products to guanranty the products has good quality. If it doesn't meet our requirement, the goods will be refused.
3. Do you have price advantage?
For us, the quality is our first consideration. And the second consideration is the price. We couldn't say we have the lower price, because of quality issue. We need to say we have the best price.
4. How long do you do the export business?
For our company, it starts in 2012. And for our sales persons, they have 8-10years experience to do the international business. They understand each step for the export and do good service for each of our clients.
Send Message
