Model NO.
XYT-19
Thread Type
M
Wiring Type
Four-Wire
IP Rating
IP65
Certification
CE
Customized
Customized
Transport Package
Standard Carton Packaging
Specification
19mm
Trademark
XINYUTENG
Origin
China
HS Code
9026209090
Production Capacity
50000piece /Years
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Digital Type
Production Process:
Normal Wirewound
Material:
Stainless Steel
High Accuracy 0.25% Low Cost Water Oil Hydraulic Pressure Sensor
High stable OEM sensor is the piezoresistive pressure sensor with isolated construction and precise compensation. It
Features
Application
Electrical Performance
High stable OEM sensor is the piezoresistive pressure sensor with isolated construction and precise compensation. It
uses high stable silicon die, stainless steel 316L housing with diameter Ф19mm. Wider temperature compensation and zero
correction are calibrated by laser trimming technics. The measured pressure is transmitted onto silicon die through 316L diaphragm and inner media, to transform the pressure to electric signal. It can be filled with Fluorinated Oil. Because of its good biological inertness, it can dissolve a large amount of breathing gas, and can be quickly discharged from the human body. It is more suitable for the pressure measurement of the oxygen in medical applications. XYT19 pressure sensor is inspected and screened on automatic .production line, testing and checking time after time strictly.
It is widely used for various pressure measurement fields.
correction are calibrated by laser trimming technics. The measured pressure is transmitted onto silicon die through 316L diaphragm and inner media, to transform the pressure to electric signal. It can be filled with Fluorinated Oil. Because of its good biological inertness, it can dissolve a large amount of breathing gas, and can be quickly discharged from the human body. It is more suitable for the pressure measurement of the oxygen in medical applications. XYT19 pressure sensor is inspected and screened on automatic .production line, testing and checking time after time strictly.
It is widely used for various pressure measurement fields.
Features
Pressure range 0~20kPa…100MPa .
Gauge, absolute, sealed gauge .
Constant current / constant voltage .power supply .
Silicone oil or Fluorinated Oil filled, enable to measure various media
Φ19mm standard OEM pressure sensor .
Full stainless steel 316L .
Wide temperature compensation .-10ºC ~80ºC .
Long-term stability± 0.1%FS/year .
Application
Industrial process control .
Level measurement .
Gas, liquid pressure measurement
Pressure checking meter .
Pressure calibrator .
Liquid pressure system and switch .
Cooling equipment and air conditioning system .
Aviation and navigation inspection.
Electrical Performance
Power supply: ≤2.0mA DC; ≤10V DC
Electrical connection: φ0.5mm Kovar pin or 100mm silicon
rubber flexible wires
Common mode voltage output: 50% input (typ.)
Input impedance: 2kΩ~6kΩ
Output impedance: 3.5kΩ~6kΩ
Response (10%~90%): <1ms
Insulation resistor: 100MΩ, 100VDC
Over pressure: 1.5 times FS
Construction Performance
Diaphragm: stainless steel 316L
Housing: stainless steel 316L
Pressure leading tube : stainless steel 316L
Pin: Kovar
O-ring: Viton
Environment Condition
Basic Condition
Environment Condition
Shock: no change at 10gRMS, (20~2000)Hz
Impact: 100g,11ms
Media compatibility: the gas or liquid which is
compatible with stainless steel and Viton
Basic Condition
Media temperature: (35±1)ºC
Environment temperature: (35±1)ºC
Shock: 0.1g(1m/s2)Max
Humidity: (50%±10%)RH
Local air pressure: (86~106)kPa
Power supply: (1.5±0.0015)mADC
Specifiation
Specifiation
| Iterm | Min | Type | Max | Units |
| Linearity | ±0.15 | ±0.20 | %FS,BFSL | |
Repeatability | ±0.05 | ±0.075 | %FS | |
Hysteresis | ±0.05 | ±0.075 | %FS | |
Zero output | ±2 | mV DC | ||
FS output ** | 70 | mV DC | ||
Zero thermal error*** | ±0.075 | ±1.0 | %FS,@35ºC | |
Span thermal error | ±0.075 | ±1.0 | %FS,@35ºC | |
Compensated temp. range | -10~80 0~70(7kPa,20kPa,35kPa) | ºC | ||
Working temp. range | ºC | |||
Storage temp. range | ºC | |||
Stability error | ±0.1 | ±0.2 | %FS/year | |
*testing at basic condition * for range code 0C, FS output ≥45mV *for rang code 0C, Zero thermal error≤1.5%FS | ||||
Send Message
