Dunlop(FR) 9''1/4x1 S09101 One Convoluted Rubber Air Suspension Spring
OEM NO.
Dunlop(FR) 9''1/4×1 S09 10 1
Dunlop(FR) 9''1/4×1S09 10 1
Dunlop(FR) 9''1/4×1S0910 1
Dunlop(FR) 9''1/4×1S09101
Dunlop(FR) 9''1/4×1SO9101
Dunlop(FR) 9''1/4×1 SO9101
Phoenix SP 1B 12
Phoenix SP1B 12
Phoenix SP1B12
Phoenix SP 1 B 12
Phoenix SP1 B 12
Fire-stone W01-M58-6374
Fire-stone W01M586374
Fire-stone W01 M58 6374
Fire-stone WO1M586374
Fire-stone WO1-M58-6374
Fire-stone WO1 M58 6374
Fire-stone w01M586374
Fire-stone w01 M58 6374
Fire-stone w01-M58-6374
Contitech FS 200-10
Contitech FS200-10
Contitech FS 200 10
Contitech FS200 10
Contitech FS 20010
Contitech FS20010
Bos-ch 822419004
Fes-to EB-250-85
Fes-to EB 250 85
Fes-to EB250-85
Fes-to EB25085
Norgren PM/31091(81/4×1)
Specifications and Detailed Technical Parameters:AIRSUSTECH 1B6910
Nut/blind nut
Top plate screw (nut) teeth:2XM8×1.25
The screw center distance of the top cover plate: 89mm
Screw (nut) teeth of the bottom cover plate:2XM8×1.25
The screw center distance of the bottom cover plate: 89 mm
Air hole/air inlet/air fittings
Air hole/air inlet: G3/4
The screw center distance between the air hole and the nut: 38mm
Cover plate
Top plate diameter: 160 mm
Diameter of the bottom cover: 160 mm
Bell rubber bellows
Rubber bellows diameter: 222 mm
Height: 110mm
Bumper block/bumper block
No bumper block
Belt loop/Belt loop
With belt loop: No belt loop
Min. pressure: 0 bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 2.3kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 110mm, minimum 90mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 5.5 | 7.5 | 9.6 | 11.9 | 14.0 | 15.7 | 2.7 |
| Spring rate [N/cm] | 1500 | 2050 | 2600 | 3150 | 3700 | 4250 | |
| Natural frequency [Hz] | 2.6 | 2.6 | 2.6 | 2.6 | 2.6 | 2.6 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 120 | 4.5 | 6.2 | 8.2 | 10.4 | 12.1 | 13.8 | 2.8 |
| 110 | 5.5 | 7.5 | 9.6 | 11.9 | 14.0 | 15.7 | 2.7 | |
| 100 | 6.3 | 8.6 | 11.0 | 13.4 | 15.5 | 17.5 | 2.3 | |
| 90 | 7.0 | 9.4 | 12.1 | 14.6 | 17.0 | 19.2 | 2.2 | |
| 80 | 7.6 | 10.2 | 13.0 | 15.7 | 18.2 | 20.6 | 1.8 | |
| 70 | 8.1 | 10.9 | 13.6 | 16.5 | 19.3 | 21.9 | 1.6 | |
| 60 | 8.5 | 11.3 | 14.2 | 17.1 | 20.1 | 23.0 | 1.3 | |
Air Spring
Rubber air spring
The rubber air spring is a kind of rubber element which is formed by the cord layer, the inner and outer rubber layer or the steel ring after being formed and vulcanized to form a flexible body. Commonly known as air springs, rubber air bags, air bags, etc.
Rubber air spring assembly
The rubber air spring, the upper base, the lower base (piston) and the buffer pad are assembled to form a whole with a sealed air chamber.
The photos of 1B6910
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
Send Message
