Model NO.
704
Transport Package
Iron Frame
Specification
1640*57*330
Trademark
RN
Origin
China
HS Code
8701901190
Production Capacity
20000 PCS/Year
Condition:
New
Axle Number:
1
Application:
Tractor
Certification:
ISO
Material:
Casting Iron
Type:
Front Axles
Product Information:
>>Implementing ltalian Fiat wheel tractor advanced technology;
>>Using middle-arranged type transmission shaft and swing type center swing pin;
>>Internal structure:middle reducer,differential and final planet reducer, good rigidity with whole front axle case;
>>Roller bearing using between the ending and the pin for light and efficient steering;
>>Independent oil road,hydraulic pressure steering,steering angle to 50°;
>>Adopting machining center and special machine for machining,planetary reduction gear for gear grinding,all the sealing parts are imported ones,not damaged assembly;
>>Adaptive for 65-80ps four-wheel driving tractor;
Technical Parameter:
>>Implementing ltalian Fiat wheel tractor advanced technology;
>>Using middle-arranged type transmission shaft and swing type center swing pin;
>>Internal structure:middle reducer,differential and final planet reducer, good rigidity with whole front axle case;
>>Roller bearing using between the ending and the pin for light and efficient steering;
>>Independent oil road,hydraulic pressure steering,steering angle to 50°;
>>Adopting machining center and special machine for machining,planetary reduction gear for gear grinding,all the sealing parts are imported ones,not damaged assembly;
>>Adaptive for 65-80ps four-wheel driving tractor;
Technical Parameter:
| Performance parameter | RN85 Front driving axle (704) | |
| Driving ratio | 14.95 | |
| Outline dimension | 1640×570×330 | |
| Driving shaft front axle | Middle-arranged driving shaft | |
| Input shaft parameter | m=2 z=14 α=30° | |
| Connection bolt between hub and spoke | 6×M16×1.5 | |
| Distance between spokes (mm) | 1575 | |
| The pressure of the hydraulic oil | 10±0.5 | |
| load bearing (kN) | 16.27 | |
| Net weight (KG) without oil | 180 | |
| Oil Volume | Middle (L) | 5 |
| Round edge (L) | 1.5 | |
| Front Axle Position | Extroversion angle of front wheel | 1° |
| Introversion angle | 7°30´ | |
| Retroverted angle | 3° | |
| Fore tie (mm) | 1~5 | |
| Steering method | Fluid-link steering | |
| Swing angle of the front axle | 12° | |
| Maximum steering angle of front wheel | 50° | |
| Steering Cylinder | Steering hydraulic cylinder type | Right rear |
| Diameter of steering hydraulic cylinder(mm) | 50 | |
| Steering hydraulic cylinder quantity | 1 | |
| Steering hydraulic cylinder travel(mm) | 190 | |
Send Message
